Software Development. Prototyping and Training. RTKLIB

Software Development

For software development for communication with receivers, USB dongles and magnetic antennas attached to the windowsill are the most convenient options.

Dongles are available for all receivers:

• ELT0084 - NEO-M8N receiver
• ELT0085 - NEO-M8T receiver
• ELT0103 - NEO-M9N receiver
• ELT0164 - NEO-M9V ADR+UDR receiver
• ELT0095 - ZED-F9T-00B receiver + second SMA connector for 1PPS output
• ELT0110 - ZED-F9P receiver + second SMA connector for 1PPS output
• ELT0111 - ZED-F9H receiver + second SMA connector for 1PPS output
• ELT0147 - ZED-F9T-10B receiver + second SMA connector for 1PPS output

For the ELT0147 receiver with ZED-F9T-10B, the best antenna choice is the ELT0140 patch antenna with a 5-meter cable. For all other dongles (which operate in the L1 or L1/L2b range), the recommended antenna is the ELT0012 patch antenna with a 5-meter cable.

Prototyping and Training

For training and rapid prototyping, smart antennas are the most suitable. They can be attached using either a magnetic mount or double-sided tape. There are two options for smart antennas:

First option with USB interface:

• ELT0155 - NEO-M9N receiver, black antenna
• ELT0155W - NEO-M9N receiver, white antenna
• ELT0156 - ZED-F9P receiver, black antenna
• ELT0156W - ZED-F9P receiver, white antenna

Second option with UART or SPI interface (determined by jumper on the board):

• ELT0171 - ZED-F9P receiver, black antenna
• ELT0172 - NEO-M9N receiver, black antenna

RTKLIB

For experiments with RTKLIB, there are many boards based on the NEO-M8T receiver. The best one (and the most expensive) is ELT0055 with a classic Tallysman antenna. The cheapest option is ELT0080. There are also options in between, such as ELT0070, ELT0046, and ELT0062.

© Eltehs SIA 2024