UM980 Module Specifications
UM980 Module Specifications
General Description:
- Based on the new generation GNSS SoC - NebulasIV, which integrates RF, baseband, and high precision algorithm
- 17.0 x 22.0 x 2.6 mm LGA package
- Supports on-chip RTK positioning calculation on all systems and multiple frequencies
- Supports GPS L1C/A/L1C/L2P(Y)/L2C/L5, BDS B1I/B2I/B3I/B1C/B2a/B2b, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, QZSS L1C/A/L1C/L2C/L5, NavIC L5 and SBAS L1C/A
- All-system multi-frequency RTK engine and advanced RTK technology
- Independent tracking of different frequencies and 60dB narrowband anti-jamming technology
- 1408 channels, based on NebulasIV
Frequency:
- GPS L1C/A/L1C/L2P(Y)/L2C/L5
- BDS B1I/B2I/B3I/B1C/B2a/B2b
- GLONASS G1/G2/G3
- Galileo E1/E5a/E5b/E6
- QZSS L1C/A/L1C/L2C/L5
- NavIC L5
- SBAS L1C/A
Single point positioning (RMS):
- Horizontal: 1.5 m
- Time Accuracy(RMS) - 20 ns
- Vertical: 2.5 m
- Velocity Accuracy (RMS) - 0.03 m/s
DGPS (RMS):
- Horizontal: 0.4 m
- Cold start < 12
- Vertcal: 0.8 m
- Initialization Time < 5 s (typical)
RTK (RMS):
- Horizontal: 0.8 cm + 1 ppm
- Initialization Reliability > 99.9%
- Vertical: 1.5cm + 1 ppm
- Data Update Rate 50 Hz* Positioning
Observation accuracy (RMS):
BDSGPSGLONASSGalileoB1I/L1 C/A/G1/E1 Code10 cm10 cm10 cm10 cmB1I/L1C/A/G1/E1 Carrier Phase1 mm1 mm1 mm1 mmB2I/L5/E5a/E5b Code10 cm10 cm10 cm10 cmB2I/L5/E5a/E5b Carrier Phase1 mm1 mm1 mm1 mmB3I/L2P(Y)/L2C/G2 Code10 cm10 cm10 cm10 cmB3I/L2P(Y)/L2C/G2 Carrier Phase1 mm1 mm1 mm1 mm
- Differential Data - RTCM V3.X
- Data Format - NMEA-0183, Unicore
Physical Characteristics:
- Packaging: 54 pin LGA
- Dimension: 17.0 × 22.0 × 2.6 mm
- Weight: 1.88 ± 0.03 g
Environmental Specifications:
- Working temperature: -40 °C ~ +85 °C
- Storage temperature: -55 °C ~ +95°C
- Humidity: 95% No condensation
- Vibration: MIL-STD-810F
- Shock: MIL-STD-810F
Communication Interfaces:
- 3 × UART (LVTTL)
- 1 × I2C*
- 1 × SPI* (slave)
- 1 × CAN* (shared with UART3)
Note: Items marked with * are only supported by specific firmware.
UM980 All-constellation Multi-frequency High Precision Positioning Module
UM980 All-constellation Multi-frequency High Precision Positioning Module
SKU: UM980
Brand: Unicore
Tax excluded
UM980 All-constellation Multi-frequency High Precision RTK GNSS receiver.
UM980 is Unicore’s new-generation proprietary high-precision RTK positioning module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. The module supports GPS L1C/A/L1C/L2P(Y)/L2C/L5, BDS B1I/B2I/B3I/B1C/B2a/B2b, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, QZSS L1C/A/L1C/L2C/L5, NavIC L5 and SBAS L1C/A. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Relying on the excellent performance, UM980 is well suited for high-precision navigation and positioning applications such as precision agriculture, surveying and mapping and so on.
Many new geodetic receivers based on the UM980, for example Sfaira One, NetBOX2, Stonex S900 and more.
Available in stock (>100 pcs)
Couldn't load pickup availability
UM980 Module Specifications
UM980 Module Specifications
General Description:
- Based on the new generation GNSS SoC - NebulasIV, which integrates RF, baseband, and high precision algorithm
- 17.0 x 22.0 x 2.6 mm LGA package
- Supports on-chip RTK positioning calculation on all systems and multiple frequencies
- Supports GPS L1C/A/L1C/L2P(Y)/L2C/L5, BDS B1I/B2I/B3I/B1C/B2a/B2b, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, QZSS L1C/A/L1C/L2C/L5, NavIC L5 and SBAS L1C/A
- All-system multi-frequency RTK engine and advanced RTK technology
- Independent tracking of different frequencies and 60dB narrowband anti-jamming technology
- 1408 channels, based on NebulasIV
Frequency:
- GPS L1C/A/L1C/L2P(Y)/L2C/L5
- BDS B1I/B2I/B3I/B1C/B2a/B2b
- GLONASS G1/G2/G3
- Galileo E1/E5a/E5b/E6
- QZSS L1C/A/L1C/L2C/L5
- NavIC L5
- SBAS L1C/A
Single point positioning (RMS):
- Horizontal: 1.5 m
- Time Accuracy(RMS) - 20 ns
- Vertical: 2.5 m
- Velocity Accuracy (RMS) - 0.03 m/s
DGPS (RMS):
- Horizontal: 0.4 m
- Cold start < 12
- Vertcal: 0.8 m
- Initialization Time < 5 s (typical)
RTK (RMS):
- Horizontal: 0.8 cm + 1 ppm
- Initialization Reliability > 99.9%
- Vertical: 1.5cm + 1 ppm
- Data Update Rate 50 Hz* Positioning
Observation accuracy (RMS):
BDSGPSGLONASSGalileoB1I/L1 C/A/G1/E1 Code10 cm10 cm10 cm10 cmB1I/L1C/A/G1/E1 Carrier Phase1 mm1 mm1 mm1 mmB2I/L5/E5a/E5b Code10 cm10 cm10 cm10 cmB2I/L5/E5a/E5b Carrier Phase1 mm1 mm1 mm1 mmB3I/L2P(Y)/L2C/G2 Code10 cm10 cm10 cm10 cmB3I/L2P(Y)/L2C/G2 Carrier Phase1 mm1 mm1 mm1 mm
- Differential Data - RTCM V3.X
- Data Format - NMEA-0183, Unicore
Physical Characteristics:
- Packaging: 54 pin LGA
- Dimension: 17.0 × 22.0 × 2.6 mm
- Weight: 1.88 ± 0.03 g
Environmental Specifications:
- Working temperature: -40 °C ~ +85 °C
- Storage temperature: -55 °C ~ +95°C
- Humidity: 95% No condensation
- Vibration: MIL-STD-810F
- Shock: MIL-STD-810F
Communication Interfaces:
- 3 × UART (LVTTL)
- 1 × I2C*
- 1 × SPI* (slave)
- 1 × CAN* (shared with UART3)
Note: Items marked with * are only supported by specific firmware.
UM980 All-constellation Multi-frequency High Precision Positioning Module
Accessories
UM980 RTK InCase PIN GNSS receiver board
SKU: ELT0220-SUM980 RTK InCase PIN GNSS receiver board with USB C
SKU: ELT0221-SUM980 RTK GNSS USB Dongle with SMA antenna
SKU: ELT0222-MB2-FDUM980 RTK GNSS receiver board with USB C and JST
SKU: ELT0223UM980 Mic RTK GNSS receiver
SKU: ELT0224-IUM980 M.2 socket RTK GNSS receiver
SKU: ELT0225UM980 mPCIe socket RTK GNSS receiver
SKU: ELT0226UM980 RTK GNSS Smart Antenna module with USB-C, RFI protection and SMA Helix antenna in Metal case.
SKU: ELT0228-FD
Your cart
(0)
Your cart is currently empty.
Not sure where to start? Try these collections:
Order note
Estimate Shipping
Coupon
Product Comparison
| Description |
| Price |
| Vendor |
| Type |
| Product variants |
| UM980 All-constellation Multi-frequency High Precision RTK GNSS receiver. UM980 is Unicore’s new-generation proprietary high-precision RTK positioning module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. The module supports GPS L1C/A/L1C/L2P(Y)/L2C/L5, BDS B1I/B2I/B3I/B1C/B2a/B2b, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, QZSS L1C/A/L1C/L2C/L5, NavIC L5 and SBAS L1C/A. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Relying on the excellent performance, UM980 is well suited for high-precision navigation and positioning applications such as precision agriculture, surveying and mapping and so on. Many new geodetic receivers based on the UM980, for example Sfaira One, NetBOX2, Stonex S900 and more. | Regular price
€139,99
Sale price
€139,99
Regular price
Unit price
/per
| Unicore |
Choose your option
UM980 All-constellation Multi-frequency High Precision Positioning Module
UM980 All-constellation Multi-frequency High Precision Positioning Module
Vendor: Unicore
Tax excluded
- Modern
- Eco-certified
- Warranty
Available in stock (>100 pcs)
UM980 All-constellation Multi-frequency High Precision RTK GNSS receiver.
UM980 is Unicore’s new-generation proprietary high-precision RTK positioning module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. The module supports GPS L1C/A/L1C/L2P(Y)/L2C/L5, BDS B1I/B2I/B3I/B1C/B2a/B2b, GLONASS G1/G2/G3, Galileo E1/E5a/E5b/E6, QZSS L1C/A/L1C/L2C/L5, NavIC L5 and SBAS L1C/A. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Relying on the excellent performance, UM980 is well suited for high-precision navigation and positioning applications such as precision agriculture, surveying and mapping and so on.
Many new geodetic receivers based on the UM980, for example Sfaira One, NetBOX2, Stonex S900 and more.
- Choosing a selection results in a full page refresh.
- Opens in a new window.

