Review for "Onocoy UM980 Budget GNSS Miner with Integrated RF Splitter (supports other decentralized networks)"

Onocoy UM980 Budget GNSS Miner with Integrated RF Splitter (supports other decentralized networks)
Onocoy UM980 Budget GNSS Miner with Integrated RF Splitter (supports other decentralized networks)

Budget UM980 GNSS RTK CORS Station based on Raspberry PI Zero 2 W. The ELT_RtkBase software support NTRIP server, NTRIP caster, TCP server and TCP client connections and data logging, RTCM3 and RINEX data formats. Direct support for Onocoy and RTK Direct services, local database for hundreds of rovers. Four different methods for base coordinates detection. Detailed documentation for entry level customers, fast and easy setup. Open source software, custom modification possible.  This product comes with 1 years worldwide warranty Select the best base station receiver for your needs

Review

0 1 2 3 4
(4/5) 
By Eric P on 04/05/2025 Onocoy UM980 Budget GNSS Miner with Integrated RF Splitter (supports other decentralized networks) 0 of 0 people found the following review helpful
 Verified Purchase
Total Rating: 0 1 2 3 4

All docs are on the SD Cards ( Sd card, is not destroyed, if you put it inside the smartphone to read the PDF ) but you'll need a PC to setup the Wifi. Wifi is OK when light is red, gps is ok when light is Green ( blink is not good ). The Wifi lock to an existing AP ( AP2 or AP do not care ). You do not need external Power to setup "USB-C" make the job. you cannot connect to USB they remove "Echo" do not try you'll get crazy... philosophy is : "Wifi". not 5 stars because : Please Add the 1Euros MicroSD to SDCard !!! in some country this is very hard to find. please add a A4 Paper in the boxe "Picture of the system working", and the lines, i write above...


Shop owner reply (07/05/2025):
Dear Eric
1) You are right, we are really late with the documentation.. Preliminary version - https://eltehs.lv/ELT_RTKBase_v1.8.0_EN.pdf

2) The documentation will be available in a few days at https://gnss.store/blog/category/elt-rtk-base.html and the link to it will be in the product card.

3) Connecting to WiFI - wait for the "Internet" LED to blink and press the WPS button on the access point. Unfortunately, this was not in the old documentation.

4) The USB connector is the receiver connector. You can update the firmware through it using UPrecise.

5) Instead of an adapter, maybe a USB card reader would be better?
Was this review helpful to you? Yes No
 Report abuse