Step 1: Open Settings
To detect a GNSS receiver, you need to perform the “Detect” operation in the settings. Go to the Settings page, and to the right of “Main service”, click the Options button.
Step 2: Start Detection
Click the “Detect/Configure” button and select “Detect” from the drop-down menu.
Step 3: Detection Process
The detection process will begin automatically. Once completed, the receiver is detected.
Once completed, the receiver is detected.
Step 4: Save Receiver Settings
You can then click the Apply button to save the detected receiver's settings, including:
- Port
- Speed
- Receiver name
- Protocol type
These four settings will be used later during the receiver configuration.
Step 5: Select Protocol
Septentrio receivers can operate using either the rtcm3 protocol (default) or the sbf protocol — with the exception of Mosaic T, which supports only sbf. u‑blox receivers, in addition to the default rtcm3 protocol, can also use their proprietary ubx protocol. Details about the effect of protocol selection are described in the section “RTCM3 Proposals”. To switch to the sbf or ubx protocol, change the protocol in the “Receiver format” field after detection and then proceed with the configuration. Please note: When the selected receiver protocol differs from rtcm3, communication via NTRIP v2 becomes unavailable.
