{"product_id":"elt0719","title":"mosaic-H INDUSTRIAL Dual Channel receiver with Ethernet and PoE","description":"\u003ch5\u003e\u003cstrong\u003eIndustrial IP67 dual-channel all-constellation multi-frequency high-precision RTK GNSS receiver based on the mosaic-H engine, with Ethernet and Power over Ethernet (PoE).\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eBuilt for permanent outdoor duty. Beyond the two antenna ports, the IP67 \/ IP69K-rated housing has exactly one opening: a sealed 12-pin industrial connector carrying power, Ethernet, RS-232 and USB through a single mating cable — nothing to gland, nothing to seal on site, nothing to corrode. RS-232 rather than bare UART lets the receiver talk directly to industrial controllers, marine electronics and existing vehicle systems over long cable runs, with no level converter in a junction box. In the field it runs on PoE or on a wide 9–36 V input that takes 12 V and 24 V vehicle, machinery and marine supplies directly; on the bench, 5 V over the same connector's USB line powers and configures it with no external supply at all. Operating from −10 °C to +60 °C and rated for high-pressure washdown, it mounts straight onto a mast, a roof, an implement frame or a wheelhouse — at a price normally reserved for enclosure-less boards and indoor-grade units.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003emosaic-H supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eUsing dual-antenna input, the receiver delivers precise and reliable heading combined with centimeter-level RTK positioning. Heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from start-up, removing reliance on movement and aiding the initialization of INS solutions. It also provides an alternative to magnetometer-based heading sensors, which can be affected by nearby metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms.\u003c\/p\u003e\n\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eIn robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutside Industrial PI67 device\u003c\/li\u003e\n\u003cli\u003eIndustrial 12 pin connector.\u003c\/li\u003e\n\u003cli\u003e1 meter engineering or utility cable. Custom modifications are available.\u003c\/li\u003e\n\u003cli\u003ePowered by PoE, 9-36V, USB or 5V\u003c\/li\u003e\n\u003cli\u003ePassive PoE is \u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Power_over_Ethernet#Standard_implementation\" rel=\"noopener\" target=\"_blank\"\u003eIEEE 802.3af-2003\u003c\/a\u003e compatible\u003c\/li\u003e\n\u003cli\u003eEthernet with Power over Ethernet support\u003c\/li\u003e\n\u003cli\u003eTwo antenna inputs with SMA connectors\u003c\/li\u003e\n\u003cli\u003eUSB\u003c\/li\u003e\n\u003cli\u003eRS-232\u003c\/li\u003e\n\u003cli\u003e32GB SD card inside for data logging.\u003c\/li\u003e\n\u003cli\u003ePPS output\u003c\/li\u003e\n\u003cli\u003eRJ-45, DB-9, USB-C, SMA for PPS on engineering cable\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, Green Ethernet LINK, Red PVT LED (GPLED), Orange RTK LED (GPLED2). GPLED\/GPLED2 functions are configured in the receiver\u003c\/li\u003e\n\u003cli\u003eRxTools Control and Analysis Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions: 133.0 \u003cstrong\u003e× \u003c\/strong\u003e118.8 \u003cstrong\u003e× \u003c\/strong\u003e36.0 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 250 g\u003c\/li\u003e\n\u003cli\u003eWork temperature: \u003cspan\u003e-40 °C ~ +60 °C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eMounting method: screw mounting\u003c\/li\u003e\n\u003cli\u003eFully assembled, tested and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eRX and CTS inputs shall not be driven while input supply not present.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eKit content:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003emosaic-H INDUSTRIAL dual-channel receiver\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMating connector for self-made cable\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"No Cable","offer_id":58790811959628,"sku":"ELT0719","price":949.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT07x9-1_ee954c9a-9050-4e3a-a359-aede1e2509d2.jpg?v=1790676257","url":"https:\/\/gnss.store\/products\/elt0719","provider":"GNSS Store","version":"1.0","type":"link"}