{"title":"Precision Agriculture","description":"\u003ch2 data-path-to-node=\"17\"\u003eHigh-Precision Positioning for Smart Farming and Autonomy\u003c\/h2\u003e\n\u003cp data-path-to-node=\"18\"\u003eIn modern farming, every centimeter counts. \u003cb data-path-to-node=\"18\" data-index-in-node=\"44\"\u003ePrecision Agriculture\u003c\/b\u003e relies on high-quality GNSS data to optimize field operations, reduce overlap, and minimize the use of fuel, seeds, and fertilizers. Our selection of \u003cb data-path-to-node=\"18\" data-index-in-node=\"216\"\u003eGNSS hardware for agriculture\u003c\/b\u003e is engineered to deliver consistent \"pass-to-pass\" accuracy, ensuring that autonomous tractors and sprayers stay exactly on track.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"19\"\u003eCritical Features for Agricultural GNSS Hardware\u003c\/h3\u003e\n\u003cp data-path-to-node=\"20\"\u003eFarming conditions are among the most demanding for electronic equipment. Our agricultural GNSS solutions focus on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"21,0,0\"\u003e\n\u003cb data-path-to-node=\"21,0,0\" data-index-in-node=\"0\"\u003eCentimeter-Level RTK Accuracy:\u003c\/b\u003e Essential for high-precision tasks like row-cropping and strip-tilling.\u003c\/li\u003e\n\u003cli data-path-to-node=\"21,1,0\"\u003e\n\u003cb data-path-to-node=\"21,1,0\" data-index-in-node=\"0\"\u003eMulti-Constellation Robustness:\u003c\/b\u003e Utilizing GPS, GLONASS, Galileo, and BeiDou to maintain a \"fixed\" solution even near tree lines or in hilly terrain.\u003c\/li\u003e\n\u003cli data-path-to-node=\"21,2,0\"\u003e\n\u003cb data-path-to-node=\"21,2,0\" data-index-in-node=\"0\"\u003eTerrain Compensation Integration:\u003c\/b\u003e Compatible with IMU sensors to correct for vehicle roll, pitch, and yaw on uneven fields.\u003c\/li\u003e\n\u003cli data-path-to-node=\"21,3,0\"\u003e\n\u003cb data-path-to-node=\"21,3,0\" data-index-in-node=\"0\"\u003eRuggedized \u0026amp; Weatherproof:\u003c\/b\u003e Antennas and modules built to handle dust, vibration, and extreme temperatures (IP67\/IP69K ratings).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"22\"\u003eApplications of GNSS in Modern Farming\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"23,0,0\"\u003e\n\u003cb data-path-to-node=\"23,0,0\" data-index-in-node=\"0\"\u003eAuto-Steering \u0026amp; Guidance:\u003c\/b\u003e Reducing operator fatigue and eliminating skips and overlaps during tillage and seeding.\u003c\/li\u003e\n\u003cli data-path-to-node=\"23,1,0\"\u003e\n\u003cb data-path-to-node=\"23,1,0\" data-index-in-node=\"0\"\u003eVariable Rate Application (VRA):\u003c\/b\u003e Precise positioning for site-specific application of water and chemicals based on soil data.\u003c\/li\u003e\n\u003cli data-path-to-node=\"23,2,0\"\u003e\n\u003cb data-path-to-node=\"23,2,0\" data-index-in-node=\"0\"\u003eYield Mapping:\u003c\/b\u003e Collecting accurate spatial data during harvest to create detailed productivity maps for future seasons.\u003c\/li\u003e\n\u003cli data-path-to-node=\"23,3,0\"\u003e\n\u003cb data-path-to-node=\"23,3,0\" data-index-in-node=\"0\"\u003eUAV Crop Monitoring:\u003c\/b\u003e High-precision GNSS for agricultural drones used in multispectral imaging and crop health analysis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"24\"\u003eWhy Choose GNSS.store for Agriculture?\u003c\/h3\u003e\n\u003cp data-path-to-node=\"25\"\u003eWe provide professional \u003cb data-path-to-node=\"25\" data-index-in-node=\"24\"\u003eGNSS modules and helical antennas\u003c\/b\u003e that are compatible with leading agricultural standards. Whether you are retrofitting an older fleet or developing a new autonomous farming robot, our \u003cb data-path-to-node=\"25\" data-index-in-node=\"209\"\u003eprecision agriculture GNSS components\u003c\/b\u003e offer the durability and signal integrity needed for 24\/7 field operations.\u003c\/p\u003e","products":[{"product_id":"elt0011","title":"L1 High performance active GPS antenna","description":"\u003ch5\u003e\u003cstrong\u003eHigh performance active GPS antenna description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe high performance active GPS antenna for the GPS L1 bands with integrated low-noise amplifier (LNA) is the perfect match to the GPS board where high sensitivity and optimum sky coverage are essential.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eSignal Received:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGPS L1\u003c\/li\u003e\n\u003cli\u003eGLONASS G1\u003c\/li\u003e\n\u003cli\u003eSBAS L1\u003c\/li\u003e\n\u003cli\u003eQZSS L1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT0011.png?v=1762282171\" alt=\"High performance active GPS antenna\" width=\"609\" height=\"456\"\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eHigh performance active GPS antenna features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in low noise amplifier with 29 dB gain and 1.8 dB noise figure\u003c\/li\u003e\n\u003cli\u003eCustom lenght coaxial cable up to 5m\u003c\/li\u003e\n\u003cli\u003eIndustrial temperature range: –40° C to +85° C\u003c\/li\u003e\n\u003cli\u003eWide range of supply voltage: 2.7 V to 6 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003ePatch antenna characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency 1575 ± 3 MHz\u003c\/li\u003e\n\u003cli\u003eVSWR Max. 1.2\u003c\/li\u003e\n\u003cli\u003eBandwidth Min. 20 MHz\u003c\/li\u003e\n\u003cli\u003eImpedance 50\u003c\/li\u003e\n\u003cli\u003ePeak gain Min. 4 dBic (over 7 x 7 cm ground plane)\u003c\/li\u003e\n\u003cli\u003eGain coverage: (over 75% volume)\u003c\/li\u003e\n\u003cli\u003ePolarization RHCP: (Right-handed circular polarization)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eAmplifier characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGain without cable Typ: 29 dB\u003c\/li\u003e\n\u003cli\u003eNoise figure Max.: 1.8 dB\u003c\/li\u003e\n\u003cli\u003eOutput VWSR Max.: 2.0\u003c\/li\u003e\n\u003cli\u003eDC Voltage: 2.7 V – 6 V\u003c\/li\u003e\n\u003cli\u003eDC Current typ: 8.5 mA, ± 4.5 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eEnvironmental Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: –40° C to 85° C\u003c\/li\u003e\n\u003cli\u003eStorage temperature: –50° C to 85° C\u003c\/li\u003e\n\u003cli\u003eHumidity: 95% ~ 100% RH\u003c\/li\u003e\n\u003cli\u003eVibration Sine sweep: 1G (0-Peak), 10–150–10 Hz each axis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eMechanical Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 42 g (without cable)\u003c\/li\u003e\n\u003cli\u003eSize: 48 x 40 x 13 mm\u003c\/li\u003e\n\u003cli\u003eCable lenght: 5 meters\u003c\/li\u003e\n\u003cli\u003eConnectors: SMA\u003c\/li\u003e\n\u003cli\u003eIngress Protection Rating: IP67\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing color: Black\u003c\/li\u003e\n\u003cli\u003eMounting: magnetic base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"color: #2445a2; margin: 0;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-13003345\"\u003eANN-MS Product Summary\u003c\/a\u003e\u003cbr\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-15025046\"\u003eANN-MS Active GPS Antenna Data Sheet\u003c\/a\u003e\u003cbr\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-15030289\"\u003eGNSS Antennas: RF Design Considerations for u-blox GNSS Receivers\u003c\/a\u003e\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"No Ground Plane","offer_id":55848066777420,"sku":"ELT0011","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Ground Plane","offer_id":55848066810188,"sku":"ELT0011-G","price":32.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/45.jpg?v=1762282185"},{"product_id":"elt0012","title":"L1\/L2b ANN-MB Multi-Band, High Precision GNSS antenna","description":"\u003ch5\u003e\u003cstrong\u003eANN-MB Multi-Band, High Precision GNSS antenna\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ANN-MB multi-band (L1, L2\/E5b) active GNSS antennas are designed to reduce time to market for the next generation of high precision GNSS applications, which require highly accurate location abilities. The compact design, excellent price-performance ratio, and versatile mounting and connector choices provide customers with fast, easy, and reliable multi-band antenna solutions. The ANN-MB antenna is a perfect match to the latest u-blox F9 platform including the \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/search?options%5Bprefix%5D=last\u0026amp;q=ZED-F9P+module\" style=\"color: #2445a2;\"\u003eZED-F9P module\u003c\/a\u003e\u003c\/span\u003e, thus providing customers with the valuable antenna solution they need to minimize design-in efforts. IP rating IP67\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eSignal Received:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGPS L1\/L2\u003c\/li\u003e\n\u003cli\u003eGLONASS G1\/G2\/G3\u003c\/li\u003e\n\u003cli\u003eGALILEO E1\/E5b\u003c\/li\u003e\n\u003cli\u003eBDS B1I\/B2I\/B1C\/B2b\u003c\/li\u003e\n\u003cli\u003eSBAS L1\u003c\/li\u003e\n\u003cli\u003eQZSS L1\/L2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT0012.png?v=1762282196\" alt=\"ANN-MB Multi-Band, High Precision GNSS antennas\" width=\"609\" height=\"456\"\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-band (L1, L2\/E5b) active GNSS antennas with excellent price-performance ratio 28 dB\u003c\/li\u003e\n\u003cli\u003eSupports GPS, GLONASS, Galileo, and BeiDou\u003c\/li\u003e\n\u003cli\u003eFast and easy antenna solution for high precision applications\u003c\/li\u003e\n\u003cli\u003eVersatile mounting and connector options\u003c\/li\u003e\n\u003cli\u003eIP rating IP67\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eAmplifier characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGain without cable 28 ± 3.0 dB\u003c\/li\u003e\n\u003cli\u003eLNA Noise figure Max 3.2 dB\u003c\/li\u003e\n\u003cli\u003eAxial Ratio: 2.0dB max. @Zenith\u003c\/li\u003e\n\u003cli\u003eOutput VWSR Max.: 2.0\u003c\/li\u003e\n\u003cli\u003eDC Voltage: 3 - 5 V\u003c\/li\u003e\n\u003cli\u003eDC Current typ.: 15 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eMechanical Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 173 g (without cable)\u003c\/li\u003e\n\u003cli\u003eSize: 82 x 60 x 22.5 mm\u003c\/li\u003e\n\u003cli\u003eCable lenght: 5 meters\u003c\/li\u003e\n\u003cli\u003eConnectors: SMA\u003c\/li\u003e\n\u003cli\u003eHousing color: Black\u003c\/li\u003e\n\u003cli\u003eMounting: magnetic base, screw mount 2 x M4 distance 68 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-18047741\" style=\"color: #2445a2;\" target=\"_blank\"\u003eANN-MB Product Summary\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-18049862\" style=\"color: #2445a2;\" target=\"_blank\"\u003eANN-MB Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"No Ground Plane","offer_id":55848069366092,"sku":"ELT0012","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"Ground Plane","offer_id":55848069398860,"sku":"ELT0012-G","price":62.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2352.jpg?v=1762282211"},{"product_id":"elt0026","title":"LEA-M8S GPS\/QZSS GLONASS BeiDou module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8S Reference Board with sma connectors for active GPS antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8S breakout Evaluation board makes evaluating the high performance of the u-blox 8 GPS\/QZSS, GLONASS, BeiDou positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The LEA-M8S breakout is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the LEA-M8S breakout can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the LEA-M8S integrated sma connectors for High Gain GPS antenna.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LEA-M8S module delivers concurrent GNSS location capability together with high-performance u-blox M8 positioning technology in the industry proven LEA form factor. With its dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest number of visible satellites from two of the GNSS systems (GPS, GLONASS and BeiDou) for more reliable positioning. The LEA-M8S provides exceptional performance with low system power, and is optimized for cost sensitive applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply \u0026amp; Data Link via USB\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Device\/USB V2.0 compatible\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBattery holder for 3 V type 621 Lithium battery (HOT module start)\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 USB port, 1 TTL UART port, 1 RS-232 port\u003c\/li\u003e\n\u003cli\u003eTime pulse output LED and pin for time synhronization\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848088928588,"sku":"ELT0026","price":62.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/78.jpg?v=1762282443"},{"product_id":"elt0031","title":"NEO-M8N GPS GNSS receiver board with SMA and mini USB for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEW version with USB type C connectors available\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/ELT0331\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0331\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNEO-M8N Reference Board with SMA antenna connector and mini USB for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox u-blox M8 GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA,SCL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003emini USB connector\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e \u003c\/a\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 I2C port,1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848092041548,"sku":"ELT0031","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/83.jpg?v=1762282520"},{"product_id":"elt0035","title":"NEO-M8N GPS GNSS receiver board with SMA for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003e6 pin and 4 pin JST SH connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848097644876,"sku":"ELT0035","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/91.jpg?v=1762282592"},{"product_id":"elt0039","title":"NEO-M8N GPS GNSS Beidou Triple Band Antenna EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection. Ready for unwanted signal interference or multipath blocking. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848103379276,"sku":"ELT0039","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/95.jpg?v=1762282659"},{"product_id":"elt0041","title":"NEO-M8L ADR RAW receiver with 3D sensors and Triple Band Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L Reference Board with triple band antenna, including 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848108818764,"sku":"ELT0041","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/101.jpg?v=1762282700"},{"product_id":"elt0045","title":"NEO-M8N Triple Band receiver EMI and RFI protection LIS3MDL PRO version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI and RFI protection + LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. PRO Version.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have Double LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eDouble LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848113799500,"sku":"ELT0045","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/108.jpg?v=1762282752"},{"product_id":"elt0048","title":"NEO-M8L ADR receiver with 3D sensors and EMI protection + LIS3MDL PRO","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer, including inertial 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. Ready for unwanted signal interference or multipath blocking. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the UDR systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available, I2C for LIS3MDL\u003c\/li\u003e\n\u003cli\u003eTripple Band Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848119664972,"sku":"ELT0048","price":109.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/117.jpg?v=1762282808"},{"product_id":"elt0051","title":"NEO-M8L InCase series ADR RAW receiver with 3D sensors","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8L Reference Board with UF.L antenna connectors, including 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) WheelTick, RAW data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eWheelTick Out\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, WheelTick, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848124547404,"sku":"ELT0051","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2277.jpg?v=1762282867"},{"product_id":"elt0053","title":"NEO-M8N InCase series GPS GNSS receiver board for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8N Reference Board with UF.L antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848126611788,"sku":"ELT0053","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2258.jpg?v=1762282903"},{"product_id":"elt0056","title":"NEO-M8L ADR RAW receiver with 3D sensors, EMI protection + LIS3MDL and Tallysman ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR RAW receiver with 3D sensors GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna, EMI protection and LIS3MDL Magnetometer. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848130314572,"sku":"ELT0056","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/134.jpg?v=1762282959"},{"product_id":"elt0060","title":"NEO-M8P RTK receiver Base or Rover EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 Precise Point Positioning receiver X series version with SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for RTK. Very strong signal for good price. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eBoard can be used for a Base or Rover operation mode! This board designed for large scale drone or groud robots. Board have high gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. The NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance. The NEO-M8P modules enable the system integrator to access u-blox’s complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA,SCL) for magnetometer, UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848138703180,"sku":"ELT0060","price":229.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/143.jpg?v=1762283031"},{"product_id":"elt0061","title":"NEO-M8N Triple Band receiver with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. X series version very strong signal for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have High Gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, UART (Tx, Rx), I2C for LIS3MDL\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100mm; hole distance 90x90mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848139915596,"sku":"ELT0061","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/146.jpg?v=1762283053"},{"product_id":"elt0064","title":"NEO-M8L ADR RAW receiver. EMI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS X Series version receiver with high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Very strong signal level for good price. The NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous navigation in urban environment, even at signal loss, with speed or wheel-tick information from the vehicle\u003c\/li\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3 V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx) RAW data out\u003c\/li\u003e\n\u003cli\u003eMini USB connector\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm; hole distance 90x90 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848144961868,"sku":"ELT0064","price":119.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/155.jpg?v=1762283109"},{"product_id":"elt0066","title":"NEO-M8L InCase PIN series ADR RAW receiver board","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8L Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles. Incorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848147648844,"sku":"ELT0066","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/161.jpg?v=1762283150"},{"product_id":"elt0068","title":"NEO-M8N InCase PIN series GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151122252,"sku":"ELT0068","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2261.jpg?v=1762283184"},{"product_id":"elt0069","title":"NEO-M8N Triple Band receiver with EMI protection LIS3MDL XXL version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection + LIS3MDL Magnetometr. Ready for unwanted signal interference or multipath blocking. XXL Version\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151712076,"sku":"ELT0069","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/168.jpg?v=1762283207"},{"product_id":"elt0072","title":"NEO-M8L ADR Triple Band EMI protection LIS3MDL XXL version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection with LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the UDR systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART(Tx, Rx) RAW data out avaiable\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154562892,"sku":"ELT0072","price":80.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/177.jpg?v=1762283261"},{"product_id":"elt0073","title":"NEO-M8N Mini GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154693964,"sku":"ELT0073","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/179.jpg?v=1762283283"},{"product_id":"elt0076","title":"NEO-M8L Mini ADR GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR receiver with 3D sensors GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8L Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8L breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8L with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8L)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848156234060,"sku":"ELT0076","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/186.jpg?v=1762283337"},{"product_id":"elt0077","title":"NEO-M8P RTK GNSS receiver board with SMA and mini USB Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology. The NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments.\u003c\/p\u003e\n\u003cp\u003eThe base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies. The NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P modules enable the system integrator to access u-blox complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eNEO-M8P-2 highlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup battery holder\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x20 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFully assembled and ready to use\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159117644,"sku":"ELT0077","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/188.jpg?v=1762283359"},{"product_id":"elt0078","title":"NEO-M8P RTK GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 High Precision GNSS receiver EVAL module USB type A connector, I2C, UART, SPI with SMA antenna connectors. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox Real Time Kinematic (RTK) technology. The NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P modules enable the system integrator to access u-blox complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u-blox RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eNEO-M8P-2 highlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup battery holder\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x20 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159281484,"sku":"ELT0078","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/191.jpg?v=1762283380"},{"product_id":"elt0079","title":"NEO-M8N GPS GNSS BeiDou + LIS3MDL Triple Band 35mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass, Triple band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA, SCL)(for LIS3MDL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 50x50 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 29 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159904076,"sku":"ELT0079","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/195.jpg?v=1762283399"},{"product_id":"elt0081","title":"NEO-M8L ADR GPS GNSS BeiDou + LIS3MDL Triple Band 35mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass, Triple band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8L Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8L breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8L with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8L)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 50x50 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 29 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848161771852,"sku":"ELT0081","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/199.jpg?v=1762283440"},{"product_id":"elt0084","title":"NEO-M8N GPS GNSS USB dongle receiver with SMA.","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N USB dongle receiver with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N USB dongle makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N USB dongle is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N USB receiver can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested USB dongle with the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 75x25x13 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848162296140,"sku":"ELT0084","price":76.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/204.jpg?v=1762283490"},{"product_id":"elt0087","title":"ZED-F9P RTK GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW USB type C Pin to Pin compatible version available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" class=\"btn btn-default\" href=\"\/products\/elt0387\"\u003eELT0387\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-receivers\/what-is-the-principle-behind-rtk-gnss\"\u003eRTK technology\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor more details. Please note, using L5 band require\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA ,SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848164819276,"sku":"ELT0087","price":209.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848164852044,"sku":"ELT0087-L1L5","price":209.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/213.jpg?v=1762283547"},{"product_id":"elt0089","title":"ZED-F9P RTK receiver board with MultiBand antenna L1, L2 and EMI protection + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver module with USB, I2C, UART, SPI interfaces and Multi Band L1, L2 antenna. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Build-in EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eMultiBand L1, L2 antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 70x70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 56 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector and 4 pin JST for LIS3MDL magnetometr\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848165179724,"sku":"ELT0089","price":249.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/220.jpg?v=1762283588"},{"product_id":"elt0091","title":"ZED-F9P RTK GNSS receiver board with GNSS Active Quad Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options.Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. With High Performance Multiband GNSS Active Quad Helix Antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (\u003cspan\u003e\u003ca href=\"\/pages\/search-results-page?q=ZED-F9P-15B\"\u003eZED-F9P-15B\u003c\/a\u003e\u003c\/span\u003e). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848167506252,"sku":"ELT0091","price":278.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848167539020,"sku":"ELT0091-L1L5","price":278.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/230.jpg?v=1762283645"},{"product_id":"elt0092","title":"ZED-F9P RTK InCase PIN GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eI2C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(SDA, SCL),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSPI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand 2\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUART\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eedge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848168030540,"sku":"ELT0092","price":189.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848168063308,"sku":"ELT0092-L1L5","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2263.jpg?v=1776145931"},{"product_id":"elt0096","title":"ZED-F9H high precision GNSS InCase PIN module for heading applications","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations. ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848168948044,"sku":"ELT0096","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2265.jpg?v=1776146366"},{"product_id":"elt0098","title":"ZED-F9H high precision GNSS module for heading applications: SMA, USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNEW USB type C Pin to Pin compatible version available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/elt0398\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003eELT0398\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003cbr\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003cbr\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848170455372,"sku":"ELT0098","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/265.jpg?v=1762283759"},{"product_id":"elt0099","title":"NEO-M9N four GNSS receiver + LIS3MDL Compass 35mm antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver + LIS3MDL Compass with 35mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M9N with Compass\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848171798860,"sku":"ELT0099","price":64.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/270.jpg?v=1762283778"},{"product_id":"elt0100","title":"NEO-M9N four GNSS receiver with 35mm Antenna and EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver with 35mm with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e35mm High Gain ceramic patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, AssistNow Autonomous (up to 6 days) OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19027207\" style=\"color: #2445a2;\"\u003eNEO-M9N Product Summary\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19014285\" style=\"color: #2445a2;\"\u003eNEO-M9N Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19014286\" style=\"color: #2445a2;\"\u003eNEO-M9N Integration Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\" style=\"color: #2445a2;\"\u003eu-blox M9 SPG 4.00 firmware\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848172683596,"sku":"ELT0100","price":70.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/272.jpg?v=1762283798"},{"product_id":"elt0101","title":"NEO-M9N four GNSS receiver board with SMA for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available \u003c\/strong\u003e\u003c\/span\u003e\u003ca class=\"btn btn-default\" href=\"\/products\/ELT0401\"\u003e\u003cb\u003e\u003cspan style=\"color: #2445a2;\"\u003eELT0401\u003c\/span\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA, SCL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-centre ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFully assembled and ready to use\u003c\/strong\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848173076812,"sku":"ELT0101","price":58.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/277.jpg?v=1762283819"},{"product_id":"elt0102","title":"NEO-M9N four GNSS receiver + LIS3MDL Compass 25mm antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS mini receiver + LIS3MDL Compass with 25 mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M9N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) (for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/content.u-blox.com\/sites\/default\/files\/JU_EXT_404.907640e53126add7de4708d754b575ef.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848177140044,"sku":"ELT0102","price":65.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/284.webp?v=1763466493"},{"product_id":"elt0103","title":"NEO-M9N four GNSS USB dongle receiver with SMA","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS USB dongle receiver with SMA with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N USB dongle makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N USB dongle is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N USB receiver can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested USB dongle with the NEO-M9N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 75x25x13 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\" style=\"color: #2445a2;\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848177697100,"sku":"ELT0103","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/1377a.jpg?v=1763481534"},{"product_id":"elt0104","title":"NEO-M9N four GNSS receiver with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M9N four GNSS PRO version receiver with double SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. X series version very strong signal for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have High Gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SDL) (for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm; hole distance 90x90mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848178319692,"sku":"ELT0104","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/290.jpg?v=1763466901"},{"product_id":"elt0105","title":"NEO-M9N four GNSS receiver with 50mm full band L1 L2 L5 Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver with 50mm full band L1 L2 L5 Antenna and EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e50mm High Gain L1 L2 L5 full band patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, AssistNow Autonomous (up to 6 days) OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 76,5 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851724898636,"sku":"ELT0105","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/295.jpg?v=1762315437"},{"product_id":"elt0107","title":"NEO-M9N four GNSS receiver board with SMA designed for Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light. Designed to use together with Helix antenna. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with SMA antenna connectors. Best to use with Helix antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFully assembled and ready to use.\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eThis board sells without antenna!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725095244,"sku":"ELT0107","price":59.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/305.jpg?v=1762315467"},{"product_id":"elt0108","title":"NEO-M9N four GNSS receiver board set with Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS set with Helix Antenna for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N set makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with Helix antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25 gr. with mounted antenna\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eHelix Antenna included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eHelix Antenna Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eQuadrifilar helix antenna\u003c\/li\u003e\n\u003cli\u003eConcurrent GNSS reception on GPS, GLONASS, Galileo and Beidou\u003c\/li\u003e\n\u003cli\u003eRugged IP67 rating with SMA mount\u003c\/li\u003e\n\u003cli\u003eSmall form factor\u003c\/li\u003e\n\u003cli\u003eGround plane independent\u003c\/li\u003e\n\u003cli\u003eGIS, RTK and other high accuracy GNSS applications\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eLow phase center variation over azimuth and elevation and among different samples\u003c\/li\u003e\n\u003cli\u003eUltra-lightweight about 17-19 gramm\u003c\/li\u003e\n\u003cli\u003eDimension 55x25mm\u003c\/li\u003e\n\u003cli\u003eAutomotive grade electronics\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725160780,"sku":"ELT0108","price":137.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/311.jpg?v=1762315487"},{"product_id":"elt0110","title":"ZED-F9P RTK GNSS USB Dongle with SMA antenna and SMA time pulse out","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS USB dongle with SMA antenna connectors and time pulse SMA connectors. L1\/L2 or L1\/L5 options. Multi-band receiver delivers centimeter-level accuracy in seconds.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA time pulse out connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851725750604,"sku":"ELT0110","price":219.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851725783372,"sku":"ELT0110-L1L5","price":219.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/318.jpg?v=1762315528"},{"product_id":"elt0111","title":"ZED-F9H high precision GNSS dongle for heading applications with SMA","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS USB dongle with SMA antenna connectors and SMA time pulse out. Designed for heading applications.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H dongle is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface with A-type connector\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA edge timepulse connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725848908,"sku":"ELT0111","price":204.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/321.jpg?v=1762315546"},{"product_id":"elt0112","title":"ZED-F9P RTK InCase PIN GNSS receiver board with SMA and USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver InCase PIN EVAL module with USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNew pin to pin compatible version with USB type C available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/gnss-store.myshopify.com\/products\/elt0412?variant=55851803541836\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0412\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/h5\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x30 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 11 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eMini USB connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851726111052,"sku":"ELT0112","price":189.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851726143820,"sku":"ELT0112-L1L5","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/324.jpg?v=1762315565"},{"product_id":"elt0114","title":"NEO-M9N four GNSS USB receiver for Stratux ADS-B Aviation Receiver","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS USB receiver for Stratux ADS-B Dual Band Weather and Traffic Aviation receiver with 25 mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N receiver makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726307660,"sku":"ELT0114","price":58.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/332.jpg?v=1762315603"},{"product_id":"elt0115","title":"NEO-M8N USB receiver for Stratux ADS-B Aviation Receiver","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Dual Band receiver GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726373196,"sku":"ELT0115","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/334.jpg?v=1762315623"},{"product_id":"elt0117","title":"ZED-F9R RTK InCase PIN Dead Reckoning Breakout GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9R RTK InCase PIN Dead Reckoning Breakout GNSS receiver board with SMA antenna connectors and USB. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNEW pin to pin compatible version with USB type C available\u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eZED-F9R\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eGPS Breakout is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eZED-F9R\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emodule provides a highly accurate and continuous position by fusing a 3D IMU sensor, wheel ticks, a vehicle dynamics model, correction data, and GNSS measurements.\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eZED-F9R\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emodule is a 184-channel u-blox F9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~0.2 meter accuracy! That's right, such accuracy can be achieved with an RTK navigation solution when used with a correction source. Note that the ZED-F9R can only operate as a rover, so you will need to connect to a base station. The module supports concurrent reception of four GNSS systems. The combination of GNSS and integrated 3D sensor measurements on the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eZED-F9R\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eprovide accurate, real-time positioning rates of up to 30Hz.\u003c\/p\u003e\n\u003cp\u003eCompared to other GPS modules, this breakout maximizes position accuracy in dense cities or covered areas. Even under poor signal conditions, continuous positioning is provided in urban environments and is also available during complete signal loss (e.g. short tunnels and parking garages). The\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eZED-F9R\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis the ultimate solution for autonomous robotic applications that require accurate positioning under challenging conditions.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA,SCL), SPI and 2 Uart (Tx,Rx) interface\u003c\/li\u003e\n\u003cli\u003eWheelTick Pin\u003c\/li\u003e\n\u003cli\u003eDirection Pin\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-blox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x30 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 11 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eMini USB connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726602572,"sku":"ELT0117","price":249.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/341.jpg?v=1762315664"},{"product_id":"elt0118","title":"ZED-F9P RTK receiver board with MultiBand antenna L1, L2 with EMI protection + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver module with USB, I2C, UART, SPI interfaces and GPS L1, L2, GLONASS, Galileo and BeiDou Operation antenna. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Build-in EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003e\u003cspan\u003especial configuration\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eMultiBand GPS L1, L2, GLONASS, Galileo and BeiDou Operation antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 70x70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79,5 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector and 4 pin JST for LIS3MDL magnetometr\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851727520076,"sku":"ELT0118","price":259.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851727552844,"sku":"ELT0118-L1L5","price":259.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/346.jpg?v=1762315684"},{"product_id":"elt0127","title":"ZED-F9H GNSS InCase PIN module for heading applications with IPEX (U.FL)","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with IPEX (U.FL) antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003c\/p\u003e\n\u003cp\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003c\/p\u003e\n\u003cp\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eIPEX (U.FL) antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED (PIN for each LED)\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851734368588,"sku":"ELT0127","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2267.jpg?v=1762315873"},{"product_id":"elt0128","title":"ZED-F9P RTK InCase PIN GNSS receiver board with IPEX (U.FL) Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with IPEX (U.FL) antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003e\u003cspan\u003eL2 or L5?\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eIPEX (U.FL) edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED (PIN for each LED)\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851734860108,"sku":"ELT0128","price":189.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851734892876,"sku":"ELT0128-L1L5","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2745.jpg?v=1776145854"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/collections\/preagri.svg?v=1765382914","url":"https:\/\/gnss.store\/collections\/precision-agriculture.oembed?page=10","provider":"GNSS Store","version":"1.0","type":"link"}