{"title":"Heading modules","description":"\u003ch2\u003eHeading RTK GNSS Modules – Centimeter-Level Positioning \u0026amp; Precise Heading\u003c\/h2\u003e\n\u003cp\u003eOur Heading RTK GNSS modules deliver centimeter-level positioning accuracy with dual-antenna technology, providing both precise location and reliable heading data. Designed for drones, autonomous vehicles, surveying, and mapping applications, these modules ensure stable performance even in challenging GNSS environments.\u003c\/p\u003e\n\u003ch2\u003eDual-Antenna GNSS Performance \u0026amp; RTK Accuracy\u003c\/h2\u003e\n\u003cp\u003eEquipped with advanced RTK algorithms and support for all major GNSS constellations (GPS, GLONASS, Galileo, BeiDou), these modules provide accurate heading, pitch, and roll measurements. Ideal for navigation, robotics, surveying, and automation projects.\u003c\/p\u003e\n\u003ch3\u003eKey Features of Heading RTK GNSS Modules\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level positioning with dual-antenna GNSS\u003c\/li\u003e\n\u003cli\u003eReliable heading, pitch, and roll measurements\u003c\/li\u003e\n\u003cli\u003eSupports GPS, GLONASS, Galileo, and BeiDou constellations\u003c\/li\u003e\n\u003cli\u003eAdvanced RTK algorithms for high-precision navigation\u003c\/li\u003e\n\u003cli\u003eOptimized for drones, autonomous vehicles, and surveying applications\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"elt0096","title":"ZED-F9H high precision GNSS InCase PIN module for heading applications","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations. ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848168948044,"sku":"ELT0096","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-incase-pin-module-for-heading-applications-5865604.jpg?v=1782567922"},{"product_id":"elt0098","title":"ZED-F9H high precision GNSS module for heading applications: SMA, USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNEW USB type C Pin to Pin compatible version available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/elt0398\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003eELT0398\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003cbr\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003cbr\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848170455372,"sku":"ELT0098","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-module-for-heading-applications-sma-usb-1422796.jpg?v=1782567924"},{"product_id":"elt0111","title":"ZED-F9H high precision GNSS dongle for heading applications with SMA","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS USB dongle with SMA antenna connectors and SMA time pulse out. Designed for heading applications.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H dongle is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface with A-type connector\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA edge timepulse connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725848908,"sku":"ELT0111","price":204.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-dongle-for-heading-applications-with-sma-2342194.jpg?v=1782567920"},{"product_id":"elt0127","title":"ZED-F9H GNSS InCase PIN module for heading applications with IPEX (U.FL)","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with IPEX (U.FL) antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003c\/p\u003e\n\u003cp\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003c\/p\u003e\n\u003cp\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eIPEX (U.FL) antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED (PIN for each LED)\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851734368588,"sku":"ELT0127","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-gnss-incase-pin-module-for-heading-applications-with-ipex-ufl-5480500.jpg?v=1782567912"},{"product_id":"elt0159","title":"NEO-M9V InCase series GNSS module with UDR and ADR","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M9V Reference Board with UF.L antenna connectors for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology. UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW sensor data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851759239500,"sku":"ELT0159","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-incase-series-gnss-module-with-udr-and-adr-9224265.jpg?v=1782567859"},{"product_id":"elt0164","title":"NEO-M9V GNSS dongle receiver with UDR and ADR","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V USB dongle receiver with SMA antenna connectors, for your UDR systems, UAV systems, Robots, RC, FPV or other projects.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851759370572,"sku":"ELT0164","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-gnss-dongle-receiver-with-udr-and-adr-7326904.jpg?v=1782567861"},{"product_id":"elt0165","title":"NEO-M9V InCase PIN series GNSS module with UDR and ADR","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M9V Reference Board with SMA antenna connectors for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel \u003cstrong\u003eu-blox\u003c\/strong\u003e M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C, SPI\u003c\/strong\u003e and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx), RAW sensor data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eBattery holder for 3 V type 621 Lithium battery\u003cspan\u003e for HOT module start\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFully assembled and ready to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCan be easy mounted in your case by double sided tape\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851759862092,"sku":"ELT0165","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-incase-pin-series-gnss-module-with-udr-and-adr-2815878.jpg?v=1782567858"},{"product_id":"elt0166","title":"NEO-M9V ULTRA FAST UDR ADR 50Hz USB receiver for Stratux ADS-B Aviation Receiver","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V ULTRA FAST 50Hz UDR and ADR USB Aviation Receiver for STRATUX ADS-B \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003cp\u003eWith a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851759960396,"sku":"ELT0166","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-ultra-fast-udr-adr-50hz-usb-receiver-for-stratux-ads-b-aviation-receiver-8426514.jpg?v=1782567860"},{"product_id":"elt0173","title":"NEO-M9V GNSS module with UDR and ADR with vertical SMA for Helix antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V GNSS module with UDR and ADR with vertical SMA for Helix antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts. Best to use with Helix antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB, I2C and UART (Tx, Rx) RAW\u003c\/strong\u003e sensor data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851771003212,"sku":"ELT0173","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-gnss-module-with-udr-and-adr-with-vertical-sma-for-helix-antenna-1215289.jpg?v=1782567859"},{"product_id":"elt0174","title":"NEO-M9V ULTRA FAST UDR ADR 50Hz receiver with 50mm full band L1 L2 L5 Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V ULTRA FAST 50Hz UDR and ADR Receiver with 50mm full band L1 L2 L5 Antenna and EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The \u003cstrong\u003eNEO-M9V\u003c\/strong\u003e Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9V Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9V\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both \u003cstrong\u003eUDR and ADR\u003c\/strong\u003e options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis \u003cstrong\u003eNEO-M9V GNSS module\u003c\/strong\u003e with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (\u003cstrong\u003eGPS, Galileo, GLONASS, and BeiDou\u003c\/strong\u003e) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003cp\u003eWith a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, and Uart (Tx,Rx)\u003c\/li\u003e\n\u003cli\u003e50mm High Gain L1 L2 L5 full band patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003ePower LED\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight 46 gram\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eULTRA FAST Update rate! UP to 50Hz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851775197516,"sku":"ELT0174","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-ultra-fast-udr-adr-50hz-receiver-with-50mm-full-band-l1-l2-l5-antenna-1563666.jpg?v=1782567857"},{"product_id":"elt0175","title":"NEO-M9V ULTRA FAST UDR ADR 50Hz receiver with 35mm Antenna and EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V ULTRA FAST UDR ADR 50Hz receiver with 35mm with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M9V Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9V Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9V\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003cp\u003eWith a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF, BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, and \u003cstrong\u003eUart\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e35mm High Gain ceramic patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, AssistNow Autonomous (up to 6 days) OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight 46 gram\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851775328588,"sku":"ELT0175","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-ultra-fast-udr-adr-50hz-receiver-with-35mm-antenna-and-emi-protection-1102424.jpg?v=1782567857"},{"product_id":"um982","title":"UM982 Dual Сhannel All-constellation Multi-frequency High Precision Positioning and Heading Module","description":"\u003cp\u003e\u003cstrong\u003eUM982 dual channel all-constellation multi-frequency high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Dk8H2R5N4OY?si=2H0qtvhLdL8VGtxB\" title=\"YouTube video player\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Unicore","offers":[{"title":"Default Title","offer_id":55851788042572,"sku":"UM982","price":139.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-shannel-all-constellation-multi-frequency-high-precision-positioning-and-heading-module-6409268.jpg?v=1782567854"},{"product_id":"elt0210","title":"UM982 Dual Channel RTK InCase PIN GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eUM982 dual channel all-constellation multi-frequency high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI*, I2C* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 24x38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":55851788239180,"sku":"ELT0210-S","price":169.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":55851788271948,"sku":"ELT0210-I","price":169.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-channel-rtk-incase-pin-gnss-receiver-board-1881093.jpg?v=1782567853"},{"product_id":"elt0211","title":"UM982 Dual Channel RTK InCase PIN GNSS receiver board with USB C","description":"\u003ch5\u003e\u003cstrong\u003eUM982 Dual Channel All-constellation Multi-frequency High Precision GNSS receiver InCase PIN EVAL module USB, UART, SPI with two SMA\/IPEX antenna connectors and USB C connector. Base, dual antenna Rover and dual antenna heading operations. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 28x38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":55851788435788,"sku":"ELT0211-S","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":55851788468556,"sku":"ELT0211-I","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-channel-rtk-incase-pin-gnss-receiver-board-with-usb-c-9415032.jpg?v=1782567853"},{"product_id":"elt0212","title":"UM982 Dual Channel RTK GNSS USB Dongle with dual SMA antenna","description":"\u003ch5\u003e\u003cstrong\u003eUM982 Dual Channel All-constellation Multi-frequency High Precision GNSS receiver InCase PIN EVAL module USB, UART, SPI with two SMA\/IPEX antenna connectors and USB C connector. Base, dual antenna Rover and dual antenna heading operations. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003ePower LED: Purple, Time pulse LED: Green\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 65x30x15.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851788501324,"sku":"ELT0212","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-channel-rtk-gnss-usb-dongle-with-dual-sma-antenna-3541129.jpg?v=1782567853"},{"product_id":"elt0213","title":"UM982 Dual Channel RTK GNSS receiver board with USB C and JST","description":"\u003ch5\u003e\u003cstrong\u003eUM982 Dual Channel All-constellation Multi-frequency High Precision GNSS receiver board with USB C and JST connectors. UART, SPI* and I2C* interfaces. Base, dual antenna Rover and dual antenna heading operations.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eUM982 supported by: \u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA connectors\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI*, I2C* and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB-C and 12 pin JST SH connectors\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 26x39 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851789091148,"sku":"ELT0213","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-channel-rtk-gnss-receiver-board-with-usb-c-and-jst-9081366.jpg?v=1782567853"},{"product_id":"elt0214","title":"UM982 Mic Dual Channel RTK GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eMic Form Factor features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to reuse expensive LGA component, if something goes wrong\u003c\/li\u003e\n\u003cli\u003eTakes care of all the RF complexity so you only need to connect antenna directly to the module\u003c\/li\u003e\n\u003cli\u003eThis form factor is available in a variety of \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/gnss.store\/pages\/search-results-page?q=mic\u0026amp;page=1\u0026amp;rb_tags=0214%7C0224%7C0264%7C0654%7C0754%7C0774I\" target=\"_blank\"\u003e\u003cspan\u003e\u003cu\u003emodules\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 Mic Dual channel All-constellation Multi-frequency High precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e,\u003cspan style=\"color: #2445a2;\"\u003e \u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eUSB, I2C* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 24.4 x 33.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCompatible with AgOpenGPS \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/github.com\/farmerbriantee\/AgOpenGPS_Boards\/tree\/master\/TeensyModules\" style=\"color: #2445a2;\"\u003eTeensyModules\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca href=\"https:\/\/gnss.store\/products\/elt0243\" rel=\"noopener\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Surface mount \/ IPEX","offer_id":55851790336332,"sku":"ELT0214-I","price":169.99,"currency_code":"EUR","in_stock":true},{"title":"Through hole \/ IPEX","offer_id":55851790401868,"sku":"ELT0214-T-I","price":172.99,"currency_code":"EUR","in_stock":true},{"title":"Through hole \/ SMA","offer_id":55851790369100,"sku":"ELT0214-T-S","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-mic-dual-channel-rtk-gnss-receiver-4493251.jpg?v=1782567830"},{"product_id":"elt0215","title":"UM982 M.2 socket Dual Channel RTK GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eUM982 M.2 socket Dual channel All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cvideo width=\"300\" height=\"150\" controls=\"controls\"\u003e\n\u003csource type=\"video\/mp4\"\u003e\u003c\/video\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eM.2 2232 Key E compatible (Part of NGFF, Next Generation Form Factor)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTwo antenna inputs with IPEX connectors\u003c\/li\u003e\n\u003cli\u003eUSB, optional UART \u0026amp; RESET interfaces\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 22x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 g\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"USB Only","offer_id":57634297020748,"sku":"ELT0215-USB","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"USB+UART+RESET (only for 1.8V platform)","offer_id":57634297053516,"sku":"ELT0215-USB-UART-RESET","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-m2-socket-dual-channel-rtk-gnss-receiver-5956351.jpg?v=1782567828"},{"product_id":"elt0216","title":"UM982 mPCIe socket Dual Channel RTK GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eUM982 mPCIe socket Dual channel All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eFull size mini PCI express compatible\u003c\/li\u003e\n\u003cli\u003eTwo antenna inputs with IPEX connectors\u003c\/li\u003e\n\u003cli\u003eOnly USB interface used\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 30x51 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851790762316,"sku":"ELT0216","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-mpcie-socket-dual-channel-rtk-gnss-receiver-3968591.jpg?v=1782567826"},{"product_id":"elt0188","title":"NEO-M9V GNSS UDR\/ADR module with LIS3MDL magnetometer","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V Reference Board with UF.L antenna connectors and magnetometer for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) DIR pin, WOM pin WheelTick Pin, RAW sensor data out, I2C compass interface\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eUF.L antenna connectors\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 28x23 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2,9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003eBuild in LIS3MDL magnetometr\u003c\/li\u003e\n\u003cli\u003ePin holes for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851798069580,"sku":"ELT0188","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-gnss-udradr-module-with-lis3mdl-magnetometer-6070090.jpg?v=1782567824"},{"product_id":"elt0192","title":"NEO-M9V GNSS IP67 USB C dongle receiver with UDR and ADR","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V USB C IP67 dongle receiver with SMA antenna connectors, for your UDR systems, UAV systems, Robots, RC, FPV or other projects. 7075 Aluminium IP67 case.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.\u003c\/p\u003e\n\u003cp\u003eUDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851798626636,"sku":"ELT0192","price":94.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-gnss-ip67-usb-c-dongle-receiver-with-udr-and-adr-8622542.jpg?v=1782567821"},{"product_id":"elt0197","title":"NEO-M9V USB C GNSS UDR\/ADR module with LIS3MDL magnetometer","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V USB type C Reference Board with UF.L antenna connectors and magnetometer for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB type C, I2C, SPI and UART (Tx, Rx) DIR pin, WOM pin WheelTick Pin, RAW sensor data out, I2C compass interface\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eUF.L antenna connectors\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 28x23 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2,9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003eBuild in LIS3MDL magnetometr\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector for easy connect\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851800265036,"sku":"ELT0197","price":77.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-usb-c-gnss-udradr-module-with-lis3mdl-magnetometer-7390462.jpg?v=1782567815"},{"product_id":"elt0300","title":"ZED-F9H high precision GNSS USB C module with SMA for heading applications","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003cbr\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003cbr\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB C connector , I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x30 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 7,9 gr\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eUSB type C connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851805704524,"sku":"ELT0300","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-usb-c-module-with-sma-for-heading-applications-9179487.jpg?v=1782567819"},{"product_id":"elt0398","title":"ZED-F9H high precision GNSS USB C module for heading applications with SMA","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver USB C module I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003ePIN to PIN compatible with\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #218e53;\"\u003e\u003ca href=\"\/products\/elt0098\" class=\"btn btn-default\" style=\"color: #218e53;\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0098\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe main purpose of the ZED-F9H module is to provide highly accurate attitude information for applications that require precise heading. To achieve this, the ZED-F9H module works in conjunction with a ZED-F9P module, which is installed on the same vehicle. In this setup, the ZED-F9P module not only provides the accurate GNSS position but also serves as a mobile base for the ZED-F9H module. The ZED-F9H module, in turn, is responsible for delivering the precise attitude information. This collaborative setup eliminates the need for pre-calibration, making production, integration, and operation simple and straightforward. Even when the vehicle is stationary, the ZED-F9H module continues to provide reliable heading information based on GNSS.\u003c\/p\u003e\n\u003cp\u003eThis ensures that precise heading information is always available regardless of vehicle movement. Moreover, the ZED-F9H module is designed with cost-effectiveness in mind for heading applications. It features a minimal electronic bill of materials (e-BOM), which helps reduce the overall system cost. Additionally, its compact size, lightweight design, and low power consumption make it suitable for wide-scale adoption in the mass market.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB type C, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851805901132,"sku":"ELT0398","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-usb-c-module-for-heading-applications-with-sma-9613604.jpg?v=1782567813"},{"product_id":"elt0303","title":"NEO-M9V USB C GNSS UDR\/ADR module with SMA","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V USB type C Reference Board with SMA antenna connectors for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB type C, I2C, SPI and UART (Tx, Rx) DIR pin, WOM pin WheelTick Pin, RAW sensor data out, I2C compass interface\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eUF.L antenna connectors\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851810095436,"sku":"ELT0303","price":77.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-usb-c-gnss-udradr-module-with-sma-1999386.jpg?v=1782567810"},{"product_id":"elt0309","title":"NEO-M9V USB C RS232 interface GNSS UDR\/ADR module with UF.L","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9V USB type C, SPI, UART, RS232 interfaces Reference Board with UF.L antenna connectors for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology. UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB type C, I2C, SPI, UART (Tx, Rx), RS232 interface DIR pin, WOM pin, WheelTick Pin, SAFEBoot pin, Time Pulse pin RAW sensor data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eUF.L antenna connectors\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 32x26 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851822186828,"sku":"ELT0309","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-usb-c-rs232-interface-gnss-udradr-module-with-ufl-1012824.jpg?v=1782567805"},{"product_id":"elt0650","title":"M21 RTK with IMU InCase PIN GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eBynav M21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA or IPEX connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 24x38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":55851827921228,"sku":"ELT0650-S","price":149.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":55851827953996,"sku":"ELT0650-I","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-incase-pin-gnss-receiver-board-5627795.jpg?v=1782567780"},{"product_id":"elt0651","title":"M21 RTK with IMU InCase PIN GNSS receiver board with USB C","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA or IPEX connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI* and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/eltehs.lv\/BY_Connect.zip\"\u003eBY_Connect Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 24x38 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":55851829920076,"sku":"ELT0651S","price":149.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":55851829952844,"sku":"ELT0651I","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-incase-pin-gnss-receiver-board-with-usb-c-1242239.jpg?v=1782567778"},{"product_id":"elt0652","title":"M21 RTK with IMU GNSS USB Dongle with SMA antenna","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB A connector\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 65x30x15.5 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851830018380,"sku":"ELT0652","price":159.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-gnss-usb-dongle-with-sma-antenna-2269820.jpg?v=1782567773"},{"product_id":"elt0653","title":"M21 RTK with IMU GNSS receiver board with USB C and JST","description":"\u003ch5\u003e\u003cstrong\u003eBynav M21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA connectors\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, SPI*, and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB C and 12 pin JST SH connectors\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 26x39 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851830182220,"sku":"ELT0653","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-gnss-receiver-board-with-usb-c-and-jst-5698419.jpg?v=1782567775"},{"product_id":"elt0654","title":"M21 Mic RTK with IMU GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eMic Form Factor features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eAllows you to reuse expensive LGA component, if something goes wrong\u003c\/li\u003e\n\u003cli\u003eTakes care of all the RF complexity so you only need to connect antenna directly to the module\u003c\/li\u003e\n\u003cli\u003eThis form factor is available in a variety of \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/gnss.store\/pages\/search-results-page?q=mic\u0026amp;page=1\u0026amp;rb_tags=0214%7C0224%7C0264%7C0654%7C0754%7C0774I\" target=\"_blank\"\u003e\u003cspan\u003e\u003cu\u003emodules\u003c\/u\u003e\u003c\/span\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA or IPEX connector\u003c\/li\u003e\n\u003cli\u003eUSB and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/eltehs.lv\/BY_Connect.zip\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 24.5x33.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCompatible with AgOpenGPS \u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/github.com\/farmerbriantee\/AgOpenGPS_Boards\/tree\/master\/TeensyModules\"\u003eTeensyModules\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Surface mount \/ IPEX","offer_id":55851831787852,"sku":"ELT0654-I","price":149.99,"currency_code":"EUR","in_stock":true},{"title":"Through hole \/ SMA","offer_id":55851831820620,"sku":"ELT0654-T-S","price":154.99,"currency_code":"EUR","in_stock":true},{"title":"Through hole \/ IPEX","offer_id":55851831853388,"sku":"ELT0654-T-I","price":152.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-mic-rtk-with-imu-gnss-receiver-8353834.jpg?v=1782567782"},{"product_id":"elt0655","title":"M21 M.2 socket RTK with IMU GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eM.2 2230 Key A+E compatible (Part of NGFF, Next Generation Form Factor)\u003c\/li\u003e\n\u003cli\u003eAntenna input with IPEX connector\u003c\/li\u003e\n\u003cli\u003eOnly USB interface used\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 22x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851831951692,"sku":"ELT0655","price":159.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-m2-socket-rtk-with-imu-gnss-receiver-4861328.jpg?v=1782567772"},{"product_id":"elt0656","title":"M21 mPCIe socket RTK with IMU GNSS receiver","description":"\u003ch5\u003e\u003cstrong\u003eBynav M21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eFull size mini PCI express compatible\u003c\/li\u003e\n\u003cli\u003eAntenna input with IPEX connectors\u003c\/li\u003e\n\u003cli\u003eOnly USB interface used\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 30x51 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 10 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851832246604,"sku":"ELT0656","price":159.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-mpcie-socket-rtk-with-imu-gnss-receiver-5665218.jpg?v=1782567771"},{"product_id":"elt0657","title":"M21 RTK with IMU GNSS Receiver with MultiBand antenna + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eBuild-in Four-Star High-Precision Full-frequency 61mm patch antenna\u003c\/li\u003e\n\u003cli\u003eOn-board low-noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eOn-board LIS3MDL magnetometer\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB and two UART (Tx, Rx) interface\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eUSB C and two JST connectors\u003c\/li\u003e\n\u003cli\u003eTime pulse LED: Green, Power LED: Violet, RTK LED: Orange\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/eltehs.lv\/BY_Connect.zip\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 100x100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 152 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851832475980,"sku":"ELT0657","price":219.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-gnss-receiver-with-multiband-antenna-lis3mdl-3621496.jpg?v=1782567774"},{"product_id":"elt0658","title":"M21 GNSS with IMU Smart Antenna module with USB-C, RFI protection and SMA Helix antenna in Metal case","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eAntenna input with SMA connectorr\u003c\/li\u003e\n\u003cli\u003eOn-board low-noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB port with USB C connector\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/eltehs.lv\/BY_Connect.zip\" style=\"color: #2445a2;\"\u003eBY_Connect Bynav Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 45x12 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 28 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled, sealed and ready to use\u003c\/li\u003e\n\u003cli\u003eMagnetic mount with waterproof 3M double sided tape\u003c\/li\u003e\n\u003cli\u003eWaterproof 3M double sided tape for mounting\u003c\/li\u003e\n\u003cli\u003eModule can be used in base or rover mode\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"No antenna \/ Black Plastic","offer_id":55851832803660,"sku":"ELT0658-BP","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"No antenna \/ White Plastic","offer_id":57412947640652,"sku":"ELT0658-WP","price":179.99,"currency_code":"EUR","in_stock":true},{"title":"No antenna \/ Metal","offer_id":57408413794636,"sku":"ELT0658-M","price":199.99,"currency_code":"EUR","in_stock":true},{"title":"59x27 Helix \/ Black Plastic","offer_id":55851832836428,"sku":"ELT0658-59x27-BP","price":234.99,"currency_code":"EUR","in_stock":true},{"title":"59x27 Helix \/ White Plastic","offer_id":57412947673420,"sku":"ELT0658-59x27-WP","price":234.99,"currency_code":"EUR","in_stock":true},{"title":"59x27 Helix \/ Metal","offer_id":57408413827404,"sku":"ELT0658-59x27-M","price":254.99,"currency_code":"EUR","in_stock":true},{"title":"43x50 Helix \/ Black Plastic","offer_id":55851832869196,"sku":"ELT0658-43x50-BP","price":218.99,"currency_code":"EUR","in_stock":true},{"title":"43x50 Helix \/ Metal","offer_id":57408413860172,"sku":"ELT0658-43x50-M","price":238.99,"currency_code":"EUR","in_stock":true},{"title":"43x40 Helix \/ White Plastic","offer_id":57412947771724,"sku":"ELT0658-43x40-WP","price":218.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um981-rtk-gnss-smart-antenna-module-with-usb-c-rfi-protection-and-sma-helix-antenna-in-metal-case-8961511.jpg?v=1782567561"},{"product_id":"elt0659","title":"M21 RTK with IMU GNSS Raspberry PI HAT","description":"\u003ch5\u003e\u003cstrong\u003eM21 Deeply coupled IMU All-constellation Multi-frequency High Precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eM21 is Bynav new-generation proprietary high-precision RTK positioning module based on the Alice 22nm high performance automotive SoC, designed on the basis of ISO26262 ASIL B functional safety. The module supports GPS L1C\/A\/L1C\/L2\/L5, BDS B1l\/B2l\/B3l\/B1C\/B2a\/B2b, GLONASS G1\/G2, Galileo E1\/E5a\/E5b\/E6, QZSS L1\/L2\/L5\/L6(CLAS), NavIC L5, SBAS L1C\/A and L-band. The built-in anti-interference and anti-deception technologies enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as satellite signal interference and loss. Relying on the excellent performance, M21 is well suited for autonomous driving, lane-level navigation, drones and robots.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry PI 40 pin extension header, supports all Raspberry PI compatible boards and Jetson Nano\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eAntenna input with IPEX connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eOn board voltage level translators for 5V compatibility\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED and GEO LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/eltehs.lv\/BY_Connect.zip\"\u003eBY_Connect Evaluation Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eSupports onboard battery holder for ML1220 rechargeable cell for long backup applications\u003c\/li\u003e\n\u003cli\u003eDimensions 65x30.5x10 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003eELT_RTKBase User Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851833098572,"sku":"ELT0659","price":159.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/m21-rtk-with-imu-gnss-raspberry-pi-hat-5678910.jpg?v=1782567775"},{"product_id":"elt0217","title":"UM982 Dual Channel RTK GNSS receiver with Multband antenna + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eUM982 Dual channel All-constellation Multi-frequency High Precision RTK GNSS receiver with onboard patch antenna and LIS3MDL. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The module supports GPS L1C\/A\/L2P(Y)\/L2C\/L5, BDS B1I\/B2I\/B3I, GLONASS G1\/G2, Galileo E1\/E5a\/E5b and QZSS L1\/L2\/L5. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eBuild-in Four-Star High-Precision Full-frequency 61mm patch antenna\u003c\/li\u003e\n\u003cli\u003eOn-board low-noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eOn-board LIS3MDL magnetometer\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eUSB C and two JST connectors\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 100x100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 152 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851833360716,"sku":"ELT0217","price":269.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-dual-channel-rtk-gnss-receiver-with-multband-antenna-lis3mdl-7775985.jpg?v=1782567772"},{"product_id":"elt0219","title":"UM982 RTK GNSS Raspberry PI HAT","description":"\u003ch5\u003e\u003cstrong\u003eUM982 dual channel all-constellation multi-frequency high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eUM982 is Unicore’s new-generation proprietary high-precision RTK positioning and heading module based on the Nebulas IV SoC which integrates RF, baseband and high-precision algorithm. Its main and secondary antenna inputs can simultaneously track multiple frequencies of all GNSS systems, and the module can perform on-chip RTK positioning and dual-antenna heading calculations. The built-in multi-frequency anti-jamming technology enhances RTK calculation on multiple modes and frequencies, which significantly improves RTK initialization time, measurement accuracy and reliability in complex environments such as city blocks and tree shades. Featuring the extraordinary positioning performance and reliability, UM982 is a perfect choice for high-precision navigation and positioning applications, such as UAV, autonomous machine and precision agriculture. \u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUM982 supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base, Rover or Heading operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry PI 40 pin extension header, supports all Raspberry PI compatible boards and Jetson Nano\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eAntenna input with IPEX connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eOn board voltage level translators for 5V compatibility\u003c\/li\u003e\n\u003cli\u003ePurple Power LED, green Time pulse LED, red PVT LED, orange RTK LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003eELT_RtkBase\u003c\/a\u003e\u003c\/span\u003e full-featured software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eSupports onboard battery holder for ML1220 rechargeable cell for long backup applications\u003c\/li\u003e\n\u003cli\u003eDimensions 65x30.5x10 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003eELT_RTKBase User Guide\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851836670284,"sku":"ELT0219","price":179.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um982-rtk-gnss-raspberry-pi-hat-5318487.jpg?v=1782567767"},{"product_id":"elt0710","title":"mosaic-H Dual Channel RTK InCase PIN GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003emosaic-H dual channel all-constellation multi-frequency top-performance high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith dual-antenna input, mosaic-H provides precise and reliable heading combined with centimeter-level RTK positioning. With dual antenna GNSS, heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from the start, removing reliance on movement and helping initialization of INS solutions. It also provides an alternative to magnet-based heading sensors, which can be effected by metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms. In robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003emosaic-H supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eUSB and 2 UART (3.3V) interface (one of them with hardware flow control)\u003c\/li\u003e\n\u003cli\u003eEVENTA, EVENTB: 3.3V LVTTL, 5V-tolerant, protected, high-impedance external event inputs; optional 50 Ω termination\u003c\/li\u003e\n\u003cli\u003ePPS output (3.3V)\u003c\/li\u003e\n\u003cli\u003eMODULE READY \u003cspan\u003eoutput\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreen Time pulse LED, purple Power LED, red PVT LED (GPLED), orange RRTK LED (GPLED2)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOptional SD card holder for data logging. Up to 32GB memory cards supported\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.eltehs.lv\/rxtools_v23_0_1.zip\"\u003eRxTools Control and Analysis Software\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 33.7 x 49.0 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 12 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled, tested and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e RX and CTS inputs shall not be driven while input supply not present.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":58043377975628,"sku":"ELT0710-S-H","price":609.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":58043378008396,"sku":"ELT0710-I-H","price":609.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/mosaic-h-dual-channel-rtk-incase-pin-gnss-receiver-board-9887387.jpg?v=1784315354"},{"product_id":"elt0711","title":"mosaic-H Dual Channel RTK InCase PIN GNSS receiver board with USB C","description":"\u003ch5\u003e\u003cstrong\u003emosaic-H dual channel all-constellation multi-frequency top-performance high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith dual-antenna input, mosaic-H provides precise and reliable heading combined with centimeter-level RTK positioning. With dual antenna GNSS, heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from the start, removing reliance on movement and helping initialization of INS solutions. It also provides an alternative to magnet-based heading sensors, which can be effected by metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms. In robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003emosaic-H supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003e2 x UART with hardware flow control interface\u003c\/li\u003e\n\u003cli\u003eEVENTA, EVENTB: 3.3V LVTTL, 5V-tolerant, protected, high-impedance external event inputs\u003c\/li\u003e\n\u003cli\u003ePPS output\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.eltehs.lv\/rxtools_v23_0_1.zip\" target=\"_blank\"\u003eRxTools Control and Analysis Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eDimensions \u003c\/span\u003e33.7 x 49.5 \u003cspan\u003emm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 13 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eRX and CTS inputs shall not be driven while input supply not present.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"SMA","offer_id":55851839914316,"sku":"ELT0711-S","price":609.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX","offer_id":55851839947084,"sku":"ELT0711-I","price":609.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/mosaic-h-dual-channel-rtk-incase-pin-gnss-receiver-board-with-usb-c-1173861.jpg?v=1782567762"},{"product_id":"elt0713","title":"mosaic-H Dual Channel RTK InCase PIN GNSS receiver board with JST and USB C","description":"\u003ch5\u003e\u003cstrong\u003emosaic-H dual channel all-constellation multi-frequency top-performance high precision RTK GNSS receiver.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith dual-antenna input, mosaic-H provides precise and reliable heading combined with centimeter-level RTK positioning. With dual antenna GNSS, heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from the start, removing reliance on movement and helping initialization of INS solutions. It also provides an alternative to magnet-based heading sensors, which can be effected by metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms. In robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003emosaic-H supported by \u003ca href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA or IPEX connectors\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003e2 x UART with hardware flow control interface on JST SH connector\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEVENTA, EVENTB: 5V-tolerant, protected, high-impedance external event inputs on JST connecto\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003ePPS output on JST SH connector\u003c\/li\u003e\n\u003cli\u003eSD card for data logging\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.eltehs.lv\/rxtools_v23_0_1.zip\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eRxTools Control and Analysis Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 33.7 x 51.0 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 15 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e RX and CTS inputs shall not be driven while input supply not present.\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"SMA \/ 3.3V","offer_id":55851840078156,"sku":"ELT0713-S-3.3","price":624.99,"currency_code":"EUR","in_stock":true},{"title":"SMA \/ 5V","offer_id":56518418792780,"sku":"ELT0713-S-5","price":624.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX \/ 3.3V","offer_id":55851840110924,"sku":"ELT0713-I-3.3","price":624.99,"currency_code":"EUR","in_stock":true},{"title":"IPEX \/ 5V","offer_id":56518418825548,"sku":"ELT0713-I-5","price":624.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/mosaic-h-dual-channel-rtk-incase-pin-gnss-receiver-board-with-jst-and-usb-c-5061528.jpg?v=1782567762"},{"product_id":"elt0712","title":"mosaic-H Dual Channel RTK GNSS dongle","description":"\u003ch5\u003e\u003cstrong\u003emosaic-H dual channel all-constellation multi-frequency top-performance high precision RTK GNSS receiver. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith dual-antenna input, mosaic-H provides precise and reliable heading combined with centimeter-level RTK positioning. With dual antenna GNSS, heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from the start, removing reliance on movement and helping initialization of INS solutions. It also provides an alternative to magnet-based heading sensors, which can be effected by metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms. In robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003emosaic-H supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo antenna inputs with SMA connectors\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eLOGBUTTON button for data logging toggle\u003c\/li\u003e\n\u003cli\u003eSD card connector for data logging. Up to 32GB memory card supported.\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.eltehs.lv\/rxtools_v23_0_1.zip\" target=\"_blank\"\u003eRxTools Control and Analysis Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 80x40x15 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 20 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851840143692,"sku":"ELT0712","price":649.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/mosaic-h-dual-channel-rtk-gnss-dongle-7467525.jpg?v=1782567755"},{"product_id":"elt0717","title":"mosaic-H Dual Channel receiver board with Multiband antenna, SD card and LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003emosaic-H dual channel all-constellation multi-frequency top-performance high precision RTK GNSS receiver. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith dual-antenna input, mosaic-H provides precise and reliable heading combined with centimeter-level RTK positioning. With dual antenna GNSS, heading \u0026amp; pitch or heading \u0026amp; roll information is available immediately from the start, removing reliance on movement and helping initialization of INS solutions. It also provides an alternative to magnet-based heading sensors, which can be effected by metal.\u003c\/p\u003e\n\u003cp\u003eAIM+: Advanced Interference Monitoring and Mitigation, offers built-in protection against intentional and unintentional jamming and spoofing using a sophisticated system of sampling and mitigation mechanisms. In robotic devices neighboring electronics can produce RF radiation which interferes with GNSS signals. AIM+ offers protection against such interference resulting in faster set-up time and robust continuous operation.\u003c\/p\u003e\n\u003cp\u003eAdvanced Receiver Autonomous Integrity Monitoring (RAIM+) comprises fault detection mechanisms of the receiver at all the levels including the generation of measurements, quality control and navigation algorithms. Detected faulty measurements, which are typically caused by high multipath or active ionosphere, are removed from the solution.\u003c\/p\u003e\n\u003cp\u003eActivity in the ionosphere is a problem for GNSS signals, from loss of RTK fix to total loss of signal lock. Having honed our skills, supporting applications in the most iono-active areas on Earth, the result is IONO+: the most advanced protection against ionospheric disturbances to GNSS signals on any receiver.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003emosaic\u003c\/b\u003e\u003cstrong\u003e-H supported by \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/docs.px4.io\/main\/en\/gps_compass\/rtk_gps_holybro_unicore_um982.html\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003ePX4 Autopilot\u003c\/span\u003e\u003c\/a\u003e, \u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/ardupilot.org\/plane\/docs\/common-gps-for-yaw.html\" target=\"_blank\"\u003eArdupilot\u003c\/a\u003e\u003c\/span\u003e, \u003ca rel=\"noreferrer noopener\" href=\"https:\/\/discourse.agopengps.com\/t\/alternative-gps-module\/13236\/1\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eAgOpenGPS\u003c\/span\u003e\u003c\/a\u003e and other software, supporting GPS for Yaw aka Moving Baseline.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"\/products\/elt0193\"\u003eOnboard Multiband patch antenna\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSecond antenna input with IPEX connector\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eSD card connector for data logging. Max 32GB memory card supported.\u003c\/li\u003e\n\u003cli\u003e2 x UART with hardware flow control interface on JST connector and pins\u003c\/li\u003e\n\u003cli\u003eEVENTA, EVENTB external event inputs on JST connector and pins\u003c\/li\u003e\n\u003cli\u003ePPS output on JST connector and pin\u003c\/li\u003e\n\u003cli\u003eLIS3MDL on JST connector and pins\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED, Geofence LED\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.eltehs.lv\/rxtools_v23_0_1.zip\" target=\"_blank\"\u003eRxTools Control and Analysis Software\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eDimensions 100x100x25 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 155 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING:\u003c\/span\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003cspan\u003e\u003cstrong\u003eRX and CTS inputs shall not be driven while input supply not present.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851840831820,"sku":"ELT0717","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/mosaic-h-dual-channel-receiver-board-with-multiband-antenna-sd-card-and-lis3mdl-6228077.jpg?v=1782567761"},{"product_id":"elt0319","title":"ZED-F9H high precision GNSS USB C module for heading applications with UF.L","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver USB C module I2C, UART, SPI with UF.L antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003ePIN to PIN compatible with\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #218e53;\"\u003e\u003ca style=\"color: #218e53;\" class=\"btn btn-default\" href=\"\/products\/elt0098\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0098\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe main purpose of the ZED-F9H module is to provide highly accurate attitude information for applications that require precise heading. To achieve this, the ZED-F9H module works in conjunction with a ZED-F9P module, which is installed on the same vehicle. In this setup, the ZED-F9P module not only provides the accurate GNSS position but also serves as a mobile base for the ZED-F9H module. The ZED-F9H module, in turn, is responsible for delivering the precise attitude information. This collaborative setup eliminates the need for pre-calibration, making production, integration, and operation simple and straightforward. Even when the vehicle is stationary, the ZED-F9H module continues to provide reliable heading information based on GNSS. This ensures that the precise heading information is always readily available, regardless of the vehicle's movement. Moreover, the ZED-F9H module is designed with cost-effectiveness in mind for heading applications. It features a minimal electronic bill of materials (e-BOM), which helps reduce the overall system cost. Additionally, its compact size, lightweight design, and low power consumption make it suitable for wide-scale adoption in the mass market.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB type C, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eUF.L antenna connectors\u003ca style=\"color: rgb(0, 0, 0);\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca style=\"color: rgb(0, 0, 0);\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x25 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851851350348,"sku":"ELT0319","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-high-precision-gnss-usb-c-module-for-heading-applications-with-ufl-5925675.jpg?v=1782567751"},{"product_id":"elt0395","title":"NEO-M9V InCase PIN series GNSS module with UDR and ADR UF.L antenna connector","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M9V Reference Board with UF.L antenna connectors for your UDR and ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9V module Based on the ultra-robust M9 platform, NEO-M9V is the first u-blox module to include both UDR and ADR options integrated into one receiver. The module also includes various dynamic models for after-market vehicles, motorcycles, and micromobility applications. All the components needed are on the module, including IMU. This makes the dead reckoning technology accessible and easy to use. Furthermore, the whole solution runs on the module which means that it is not necessary to run external libraries on the host.\u003c\/p\u003e\n\u003cp\u003eThis NEO-M9V GNSS module with dead reckoning technology delivers three times better accuracy than GNSS-only receivers, enabling a smooth urban navigation or tracking experience. In challenging environments, GNSS-only receivers typically have many outliers. In such conditions, statistical accuracy can easily exceed 10 meters. With NEO-M9V, there are few or no outliers. In typical urban scenarios, NEO-M9V offers sub-5-meter accuracy.\u003c\/p\u003e\n\u003cp\u003eMaximum position availability is guaranteed, thanks to the concurrent reception of four global navigation satellite systems (GPS, Galileo, GLONASS, and BeiDou) and dead reckoning technology.UDR enables fast time to market, and ADR improves the accuracy performance if there are long GNSS outages. Excellent RF interference mitigation thanks to SAW\/LNA enables simple and fast RF designs including considerable cost savings from reduced design efforts.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW sensor data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eWire Pad for external backup battery\u003c\/li\u003e\n\u003cli\u003eDimensions: 32x19mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003ePin holes for easy soldering 2.54mm pitch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55851855905100,"sku":"ELT0395","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m9v-incase-pin-series-gnss-module-with-udr-and-adr-ufl-antenna-connector-1789162.jpg?v=1782567705"},{"product_id":"elt0391","title":"ZED-F9H mPCIe socket GNSS Receiver for heading applications with IPEX (U.FL)","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H mPCIe socket High Precision GNSS receiver with IPEX (U.FL) antenna connectors and  IPEX (U.FL) time pulse out connector, designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003c\/p\u003e\n\u003cp\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003c\/p\u003e\n\u003cp\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eWARNING: \u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis module requires antennas with 3.0 V power supply, such as \u003ca rel=\"noopener\" href=\"https:\/\/gnss.store\/products\/elt0243\" target=\"_blank\" style=\"color: #2445a2;\"\u003eELT0243\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851859476812,"sku":"ELT0391","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-f9h-mpcie-socket-gnss-receiver-for-heading-applications-with-ipex-ufl-2627441.jpg?v=1782567696"},{"product_id":"elt0431","title":"X20P GNSS RTK CORS Fanless Station","description":"\u003ch5\u003e\u003cstrong\u003eX20P All-constellation Multi-frequency High Precision RTK GNSS receiver\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-X20P module integrates all-band GNSS with signal modernization and innovative positioning algorithms using Real-time Kinematics (RTK), PPP-RTK, and Precise Point Positioning* (PPP) technologies in a compact, energyefficient form factor. As the most reliable position sensor from the most trusted name in GNSS, ZED-X20P ensures unparalleled reliability and performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eFanless setup, passive cooling\u003c\/li\u003e\n\u003cli\u003eBuild-in RF splitter for direct connection in multi-receiver setup\u003c\/li\u003e\n\u003cli\u003eRaspberry-PI RPI4-MODBP-2GB\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBCM2711 SOC, ARM Cortex-A72@1.5GHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWiFi 2.4 and 5GHz 802.11 b\/g\/n\/ac, Bluetooth 5.0 BLE\u003c\/li\u003e\n\u003cli\u003eELT_RtkBase full-featured software\u003c\/li\u003e\n\u003cli\u003eELT_RTKBase User Guide\u003c\/li\u003e\n\u003cli\u003emicroSD card 32GB with pre-installed software and documentation\u003c\/li\u003e\n\u003cli\u003eGNSS antenna input with SMA connector\u003c\/li\u003e\n\u003cli\u003eGigabit Ethernet port with optional PoE support\u003c\/li\u003e\n\u003cli\u003ePoE is compliant with IEEE 802.3af-2003\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Ethernet LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions 110x95x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 245\/265 gr\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eExtensive mounting options - check accessories in the related products list\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"No Antenna \/ No Adapter \/ Without PoE \u0026 4G","offer_id":55894229385548,"sku":"ELT0431","price":499.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ No Adapter \/ PoE","offer_id":55894229418316,"sku":"ELT0431-POE","price":539.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ No Adapter \/ 4G modem","offer_id":55894229451084,"sku":"ELT0431-4G","price":539.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ No Adapter \/ PoE \u0026 4G modem","offer_id":55894229483852,"sku":"ELT0431-POE-4G","price":579.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Without PoE \u0026 4G","offer_id":55894229516620,"sku":"ELT0431-PS","price":514.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE","offer_id":55894229549388,"sku":"ELT0431-PS-POE","price":554.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ 4G modem","offer_id":55894229582156,"sku":"ELT0431-PS-4G","price":554.99,"currency_code":"EUR","in_stock":true},{"title":"No Antenna \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE \u0026 4G modem","offer_id":55894229614924,"sku":"ELT0431-PS-POE-4G","price":594.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ No Adapter \/ Without PoE \u0026 4G","offer_id":55894229647692,"sku":"ELT0431-MB2","price":574.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ No Adapter \/ PoE","offer_id":55894229680460,"sku":"ELT0431-MB2-POE","price":614.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ No Adapter \/ 4G modem","offer_id":55894229713228,"sku":"ELT0431-MB2-4G","price":614.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ No Adapter \/ PoE \u0026 4G modem","offer_id":55894229745996,"sku":"ELT0431-MB2-POE-4G","price":654.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Without PoE \u0026 4G","offer_id":55894229778764,"sku":"ELT0431-MB2-PS","price":589.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE","offer_id":55894229811532,"sku":"ELT0431-MB2-PS-POE","price":629.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ 4G modem","offer_id":55894229844300,"sku":"ELT0431-MB2-PS-4G","price":629.99,"currency_code":"EUR","in_stock":true},{"title":"ANN-MB2 \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE \u0026 4G modem","offer_id":55894229877068,"sku":"ELT0431-MB2-PS-POE-4G","price":669.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ No Adapter \/ Without PoE \u0026 4G","offer_id":55894229909836,"sku":"ELT0431-100","price":609.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ No Adapter \/ PoE","offer_id":55894229942604,"sku":"ELT0431-100-POE","price":649.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ No Adapter \/ 4G modem","offer_id":55894229975372,"sku":"ELT0431-100-4G","price":649.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ No Adapter \/ PoE \u0026 4G modem","offer_id":55894230008140,"sku":"ELT0431-100-POE-4G","price":689.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Without PoE \u0026 4G","offer_id":55894230040908,"sku":"ELT0431-100-PS","price":624.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE","offer_id":55894230073676,"sku":"ELT0431-100-PS-POE","price":664.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ 4G modem","offer_id":55894230106444,"sku":"ELT0431-100-PS-4G","price":664.99,"currency_code":"EUR","in_stock":true},{"title":"Multipatch 100mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE \u0026 4G modem","offer_id":55894230139212,"sku":"ELT0431-100-PS-POE-4G","price":704.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ No Adapter \/ Without PoE \u0026 4G","offer_id":55894230171980,"sku":"ELT0431-160","price":679.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ No Adapter \/ PoE","offer_id":55894230204748,"sku":"ELT0431-160-POE","price":719.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ No Adapter \/ 4G modem","offer_id":55894230237516,"sku":"ELT0431-160-4G","price":719.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ No Adapter \/ PoE \u0026 4G modem","offer_id":55894230270284,"sku":"ELT0431-160-POE-4G","price":759.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Without PoE \u0026 4G","offer_id":55894230303052,"sku":"ELT0431-160-PS","price":694.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE","offer_id":55894230335820,"sku":"ELT0431-160-PS-POE","price":734.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ 4G modem","offer_id":55894230368588,"sku":"ELT0431-160-PS-4G","price":734.99,"currency_code":"EUR","in_stock":true},{"title":"Survey 160mm \/ USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ PoE \u0026 4G modem","offer_id":55894230401356,"sku":"ELT0431-160-PS-POE-4G","price":774.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/x20p-gnss-rtk-cors-fanless-station-9469779.jpg?v=1782567708"},{"product_id":"elt0433","title":"Budget X20P GNSS RTK CORS Fanless Station","description":"\u003ch5\u003e\u003cstrong\u003eBudget ZED-X20P GNSS RTK CORS Fanless Station\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-X20P module integrates all-band GNSS with signal modernization and innovative positioning algorithms using Real-time Kinematics (RTK), PPP-RTK, and Precise Point Positioning* (PPP) technologies in a compact, energyefficient form factor. As the most reliable position sensor from the most trusted name in GNSS, ZED-X20P ensures unparalleled reliability and performance.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/rtidQSxy6xc\" height=\"315\" width=\"560\"\u003e\n\u003c\/iframe\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eFanless setup, passive cooling\u003c\/li\u003e\n\u003cli\u003eBuild-in RF splitter for direct connection in multi-receiver setup\u003c\/li\u003e\n\u003cli\u003eRaspberry-PI RPI Zero 2 W\u003c\/li\u003e\n\u003cli\u003eRP3A0 SoC, ARM Cortex-A53@1GHz\u003c\/li\u003e\n\u003cli\u003eWiFi 2.4 GHz 802.11n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\" style=\"color: #2445a2;\"\u003eELT_RtkBase\u003c\/a\u003e\u003c\/span\u003e full-featured software\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\/tree\/main\/Doc\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eELT_RTKBase User Guide\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003emicroSD card 32GB with pre-installed software and documentation\u003c\/li\u003e\n\u003cli\u003eGNSS antenna input with SMA connector\u003c\/li\u003e\n\u003cli\u003eUSB C receiver port with access to 4 Mosiac serial ports, USB C power in port\u003c\/li\u003e\n\u003cli\u003ePower LED, GNSS LED, Internet LED and NTRIP LED\u003c\/li\u003e\n\u003cli\u003eDimensions 100x100x22.5 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 140 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"No adapter \/ No antenna \/ No","offer_id":55851864424780,"sku":"ELT0433","price":329.99,"currency_code":"EUR","in_stock":true},{"title":"No adapter \/ No antenna \/ SSID+password","offer_id":56544488456524,"sku":"ELT0433-SD","price":334.99,"currency_code":"EUR","in_stock":true},{"title":"No adapter \/ ANN-MB2 \/ No","offer_id":55851864457548,"sku":"ELT0433-MB2","price":404.99,"currency_code":"EUR","in_stock":true},{"title":"No adapter \/ ANN-MB2 \/ SSID+password","offer_id":56544488489292,"sku":"ELT0433-MB2-SD","price":409.99,"currency_code":"EUR","in_stock":true},{"title":"No adapter \/ Budget 38dB \/ No","offer_id":55851864490316,"sku":"ELT0433-B38","price":444.99,"currency_code":"EUR","in_stock":true},{"title":"No adapter \/ Budget 38dB \/ SSID+password","offer_id":56544488522060,"sku":"ELT0433-B38-SD","price":449.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ No antenna \/ No","offer_id":55851864523084,"sku":"ELT0433-AD","price":344.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ No antenna \/ SSID+password","offer_id":56544488554828,"sku":"ELT0433-AD-SD","price":349.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ ANN-MB2 \/ No","offer_id":55851864555852,"sku":"ELT0433-AD-MB2","price":419.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ ANN-MB2 \/ SSID+password","offer_id":56544488587596,"sku":"ELT0433-AD-MB2-SD","price":424.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Budget 38dB \/ No","offer_id":55851864588620,"sku":"ELT0433-AD-B38","price":459.99,"currency_code":"EUR","in_stock":true},{"title":"USB C 5V\/3A AU\/GB\/EU\/JP\/US plugs \/ Budget 38dB \/ SSID+password","offer_id":56544488620364,"sku":"ELT0433-AD-B38-SD","price":464.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/budget-x20p-gnss-rtk-cors-fanless-station-5934544.jpg?v=1782567715"},{"product_id":"elt0434","title":"X20P RTK all-bands GNSS rover","description":"\u003ch5\u003e\u003cstrong\u003eRTK all-band GNSS Rover Kit on ZED-X20P High Precision GNSS receiver with centimeter accuracy. Integrated Helix Antenna, USB-C connector and 1\/4\" thread mount, IP67 waterproof case. Wireless connectivity options Bluetooth or Wi-Fi. All-band receiver delivers centimeter-level accuracy in seconds. Designed for surveying, mapping and navigation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eWith the RTK GNSS Rover Kit you will have everything you need to start your surveying, mapping and navigation tasks with RTK and centimeter level accuracy. You can use your preferred Android application to connect with the kit over Bluetooth or use \u003ca href=\"https:\/\/u-center2-updates.u-blox.com\/u-center2-installer.exe\" style=\"color: #2445a2;\"\u003eU-center 2 Evaluation Software\u003c\/a\u003e to connect directly to ZED-X20P high precision GNSS module over USB-C.\u003c\/p\u003e\n\u003cp\u003eRover Kit ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies. It comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eRecommended Software: SurPad 4.2\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eTo unlock the full potential of your GNSS receiver, use professional \u003ca href=\"https:\/\/gnss.store\/products\/elt0499\" rel=\"noopener\" style=\"color: #5a4fcf; text-decoration: underline;\" target=\"_blank\"\u003eSurPad 4.2\u003c\/a\u003e software. This powerful surveying and design solution provides intuitive equipment control, support for all major operating modes (RTK, Static, and PPK), and seamless export to CAD formats.\u003c\/p\u003e\n\u003cp\u003eWith its multilingual interface and extensive engineering tools — including stakeout, area calculations, and road design functions — SurPad 4.2 delivers a complete, ready-to-use workflow out of the box, eliminating the need for additional third-party software.\u003c\/p\u003e\n\u003cp\u003ePurchase SurPad 4.2 together with our RTK GNSS Development Kit and save up to 30% on your software license.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe GNSS DK2 is a compact, versatile, and highly capable GNSS development kit built around a high-precision multi-band receiver delivering centimeter-level RTK accuracy. It is the successor to the original GNSS DK, designed from the ground up on a new hardware and software platform that significantly expands the range of possible applications.\u003c\/p\u003e\n\u003cp\u003eThe device is equally at home in professional surveying and mapping workflows and in custom GNSS-based projects that require flexible connectivity, configurable data routing, and multiple logging formats — all in a single, pocketable unit.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eRugged, Field-Ready Hardware\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe GNSS DK2 is housed in a compact IP67-rated waterproof enclosure with an integrated helix antenna and a standard 1\/4\"-20 threaded mount, making it immediately compatible with photography tripods. A geodetic 5\/8\"-11 adapter is included for use with surveying tripods.\u003c\/p\u003e\n\u003cp\u003eTwo USB Type-C connectors are provided: one for data communication and one for power. Both can supply power to the device, and when a power bank is connected to the power port, the data port can simultaneously charge a connected smartphone. An optional \u003cstrong\u003eVC-1 Powerbank Hand Grip\u003c\/strong\u003e accessory is available for extended field sessions without carrying a separate power bank.\u003c\/p\u003e\n\u003cp\u003eAn internal supercapacitor provides a brief energy reserve on power loss, allowing the firmware to safely close all open files — including GPX tracks — before shutting down, and enabling hot-swap of external power banks without interrupting operation.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eRich Wireless and Wired Connectivity\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe GNSS DK2 offers an unusually broad set of interfaces for a device of its size:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSB \u003c\/strong\u003e— exposes one or two USB-UART virtual serial ports (USB CDC-ACM, no driver installation required on modern operating systems) and provides USB Mass Storage access to internal storage in File Download mode\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBluetooth 4.2 Classic\u003c\/strong\u003e (BR\/EDR, SPP profile) — wireless serial connection to mobile apps and other devices\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWi-Fi\u003c\/strong\u003e 802.11b\/g\/n (2.4 GHz) — both station (STA) and access point (AP) modes, used for NTRIP corrections [1], firmware upgrades, and CLI access\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLoRa \u003c\/strong\u003e— a dedicated receiver for differential corrections at distances of up to kilometers in good line-of-sight conditions; compatible with Advanced GNSS RTK CORS Fanless Station base stations [1]\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eSeamless Integration with Mobile Applications\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe GNSS DK2 works out of the box as an RTK rover with popular Android field applications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=np.com.softwel.swmaps\" target=\"_blank\"\u003eSW Maps\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.lefebure.ntripclient\" rel=\"noopener\" target=\"_blank\"\u003eLefebure NTRIP Client\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.gnssmaster\" target=\"_blank\"\u003eGNSS Master\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.applicality.mobiletopographergis\" rel=\"noopener\" target=\"_blank\"\u003eMobile Topographer GIS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=eu.apglos.apglossurveywizard\" target=\"_blank\"\u003eApglos Survey Wizard\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.aplitop.tcpgps\" rel=\"noopener\" target=\"_blank\"\u003eTcpGPS\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.microsurvey.com\/products\/fieldgenius\/\" rel=\"noopener\" target=\"_blank\"\u003eFieldGenius\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/gnss.store\/products\/elt0499\" rel=\"noopener\" target=\"_blank\"\u003eSurPad 4.2\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.mapitgis.mapitgis\" rel=\"noopener\" target=\"_blank\"\u003eMapit GIS Professional\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=org.odk.collect.android\" target=\"_blank\"\u003eODK Collect\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=net.osmand\" target=\"_blank\"\u003eOsmAnd\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.apps.maps\" target=\"_blank\"\u003eGoogle Maps\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe application connects to the device via Bluetooth or USB, receives NMEA data, obtains RTK corrections over the internet via NTRIP, and relays them back to the receiver — which then computes a centimeter-accurate solution.\u003c\/p\u003e\n\u003cp\u003eThrough Android’s mock location mechanism, the RTK position from GNSS DK2 becomes the system-wide location on the phone, transparently available to any app that uses the standard Android location API — from \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.google.android.apps.maps\" rel=\"noopener\" target=\"_blank\"\u003eGoogle Maps\u003c\/a\u003e and \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=net.osmand\" rel=\"noopener\" target=\"_blank\"\u003eOsmAnd\u003c\/a\u003e to specialized GIS and field survey tools. Apps that support both NTRIP and mock location — such as \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=np.com.softwel.swmaps\" rel=\"noopener\" target=\"_blank\"\u003eSW Maps\u003c\/a\u003e, \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.lefebure.ntripclient\" rel=\"noopener\" target=\"_blank\"\u003eLefebure NTRIP Client\u003c\/a\u003e, and \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.gnssmaster\" rel=\"noopener\" target=\"_blank\"\u003eGNSS Master\u003c\/a\u003e — can serve as the mock location provider while simultaneously feeding RTK corrections to the device.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eFlexible Data Logging\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eThe 32 GB internal flash storage holds all logged data and configuration files. The device can simultaneously record multiple data streams in different formats:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaw binary\u003c\/strong\u003e — unprocessed receiver output for post-processing workflows\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNMEA \u003c\/strong\u003e— standard sentence log, compatible with virtually any GIS software\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGPX \u003c\/strong\u003e— track file with automatic date\/time-based naming; waypoints can be marked at any time with a single button press\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eSimple Yet Powerful Configuration\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eAll device settings are controlled through a plain-text file, \u003cstrong\u003eautoexec.txt\u003c\/strong\u003e, stored on the internal drive and executed at every startup. USB port presentation, Bluetooth channel assignments, LoRa parameters, active file writers, baud rates — all are specified in human-readable commands. A well-commented default configuration is automatically generated on first boot and serves as a ready-made starting point.\u003c\/p\u003e\n\u003cp\u003eWi-Fi credentials are stored in protected internal storage rather than in the configuration file.\u003c\/p\u003e\n\u003cp\u003eFor advanced GNSS receiver configuration — message outputs, constellations, RTK parameters — the device exposes the receiver directly over USB, allowing the use of the receiver manufacturer’s official configuration software without any intermediary.\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eReliable Firmware Upgrades\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003eFirmware can be updated over Wi-Fi (OTA), from a file placed on internal storage, or via a utility over USB. The upgrade mechanism is designed to be safe: a hardware unit cannot be permanently bricked by a failed update. If an upgrade fails, the device recovers and the process can be retried.\u003cspan style=\"color: #2445a2;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMechanical: \u003cbr\u003e- Dimensions without Power Bank Ø50х91 mm\u003cbr\u003e- Dimensions with Power Bank Ø50х187 mm\u003cbr\u003e- Weight without Power Bank 114 g\u003cbr\u003e- Weight with Power Bank (including cable) 388 g\u003c\/li\u003e\n\u003cli\u003eOperating temperature -20...+50;\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIngress protection: \u003cbr\u003e- without powerbank IP65; \u003cbr\u003e- powerbank IP44;\u003c\/li\u003e\n\u003cli\u003eElectrical: \u003cbr\u003e- powered over USB C; \u003cbr\u003e- Certification CE;\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity: \u003cspan\u003eBluetooth 4.2 BR\/EDR; Wi-Fi 802.11\/b\/g\/n; Port USB-C; LoRa\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eData: Corrections RTCM3\u003c\/li\u003e\n\u003cli\u003ePosition output NMEA\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eKit content:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eX20 RTK all-bands GNSS Rover\u003c\/li\u003e\n\u003cli\u003eHelix SMA antenna (integrated)\u003c\/li\u003e\n\u003cli\u003e7800 mAh power bank (optional)\u003c\/li\u003e\n\u003cli\u003e1\/4\" to 5\/8\" thread converter\u003c\/li\u003e\n\u003cli\u003eUSB A to USB C cable\u003c\/li\u003e\n\u003cli\u003eStorage Bag \u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGNSS Rover can be used in Rover operation mode. For complimentary Base station check our\u003c\/strong\u003e \u003cstrong\u003e\u003ca href=\"\/products\/elt0431\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eELT0431 Product\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"With SurPad \/ No Power Bank","offer_id":55851865506124,"sku":"ELT0434-SP","price":799.99,"currency_code":"EUR","in_stock":true},{"title":"With SurPad \/ 7800 mAh","offer_id":55851865538892,"sku":"ELT0434-SP-7800","price":829.99,"currency_code":"EUR","in_stock":true},{"title":"No SurPad \/ No Power Bank","offer_id":57608691286348,"sku":"ELT0434","price":599.99,"currency_code":"EUR","in_stock":true},{"title":"No SurPad \/ 7800 mAh","offer_id":57608691319116,"sku":"ELT0434-7800","price":629.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/um981-rtk-all-bands-gnss-rover-5043906.jpg?v=1782567558"},{"product_id":"elt0429","title":"ZED-X20P RTK GNSS Raspberry PI HAT","description":"\u003ch5\u003e\u003cstrong\u003eZED-X20P RTK GNSS Raspberry PI HAT All-Band all constellation GNSS receiver with IPEX (U.FL) antenna connectors. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-X20P module integrates all-band GNSS with signal modernization and innovative positioning algorithms using Real-time Kinematics (RTK), PPP-RTK, and Precise Point Positioning* (PPP) technologies in a compact, energyefficient form factor. As the most reliable position sensor from the most trusted name in GNSS, ZED-X20P ensures unparalleled reliability and performance.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eZED-X20P concurrently processes signals from the GPS, Galileo, BeiDou, QZSS, and NavIC constellations accross all GNSS bands, including L-band. The highest level of integration on a single-chip receiver enables new system architectures and creates value for industrial navigation and robotics markets in products such as unmanned autonomous vehicles (UAVs), guidance systems, and auto-steering applications. With its very high update rate, the ZED-X20P module is ideal for control applications, ensuring smooth and reliable operation. For advanced users, its pristine raw data features minimal cycle slips and exceptionally low noise in carrier range and pseudo-range measurements. ZED-X20P protects system integrity with multi-layered defenses, including a Root of Trust, jamming and spoofing detection, cryptographic authentication of navigation messages through Galileo OSNMA, and more. High-value, application-specific features such as moving baseline are also available.\u003cbr\u003e\u003cbr\u003eZED-X20P offers support for a range of correction services natively, striking the perfect balance between performance and data usage. It supports standard RTCM corrections for Virtual Reference Stations (VRS) in a Network RTK setup or a local base station setup. SPARTN-format SSR correction service broadcasts are also supported for mass-market applications, and direct reception of PPP global services simplifies deployments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry PI 40 pin extension header, supports all Raspberry PI compatible boards and Jetson Nano\u003c\/li\u003e\n\u003cli\u003eUSB C connector\u003c\/li\u003e\n\u003cli\u003eAntenna input with IPEX connector\u003c\/li\u003e\n\u003cli\u003eOn board low noise 3.3 V voltage regulator\u003c\/li\u003e\n\u003cli\u003eOn board voltage level translators for 5V compatibility\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED, RTK LED and GEO LED\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003eELT_RtkBase\u003c\/a\u003e full-featured software\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/u-center-2\"\u003eu-center2 ublox\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eSupports onboard battery holder for ML1220 rechargeable cell for long backup applications\u003c\/li\u003e\n\u003cli\u003eDimensions 65x30.5x10 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/GNSSOEM\/ELT_RTKBase\"\u003eELT_RTKBase User Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851865604428,"sku":"ELT0429","price":229.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/zed-x20p-rtk-gnss-raspberry-pi-hat-6772687.jpg?v=1782567702"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/collections\/heading_3fb9a5b3-de07-45a5-a41d-3189db975110.svg?v=1764692046","url":"https:\/\/gnss.store\/collections\/heading-rtk-gnss-modules.oembed?page=6","provider":"GNSS Store","version":"1.0","type":"link"}