{"title":"Brands","description":"\u003cp\u003eAt GNSS Store, we partner with trusted global brands to offer a wide selection of professional GNSS equipment. Each manufacturer in our catalog is known for innovation, precision, and reliability in satellite positioning technology. Explore advanced GNSS receivers, modules, and antennas from industry leaders like Septentrio, U-blox, Unicore, Bynav, and Onocoy — all designed to deliver consistent accuracy across UAV, surveying, agricultural, and autonomous applications. Whether you’re upgrading your current setup or starting a new project, our brand collections make it easy to find the right GNSS solution for your needs.\u003c\/p\u003e","products":[{"product_id":"elt0017","title":"LEA-M8T GPS breakout board with Precision Timing","description":"\u003ch5\u003e\u003cstrong\u003eGPS LEA-M8T GPS breakout board with Precision Timing description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8T standalone concurrent GNSS modules are built on the exceptional performance of the M8 GNSS (GPS, GLONASS, BeiDou, QZSS, SBAS and Galileo-ready1) engine in the industry proven NEO and LEA form factors.\u003c\/p\u003e\n\u003cp\u003eThis M8 series of modules offers high sensitivity and rapid acquisition in applications requiring low system power. The LEA-M8T modules meet the requirements for GNSS timing applications (including fixed location, survey-in and RAIM). The modules deliver multi-GNSS, raw measurement data (code and carrier phase, Doppler) and multi-GNSS, QZSS L1S and IMES message data. Both modules offer easy design migration from previous generations adding BeiDou and concurrent multi-GNSS capability to existing products.\u003c\/p\u003e\n\u003cp\u003eSophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The LEA-M8T includes a SAW filter and antenna power supervision and is perfect for use with active antennas or antenna signal distribution systems. Both modules include Flash memory for field upgrade if required. UART, SPI and I2C interfaces provide connectivity and enable synergies with most u-blox cellular modules.\u003c\/p\u003e\n\u003cp\u003eThis M8 modules use GNSS chips qualified according to AEC-Q100, are manufactured in ISO\/TS 16949 certified sites, and fully tested on a system level. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.\u003c\/p\u003e\n\u003cp\u003eu-blox’ AssistNow Assistance services supply aiding information, such as ephemeris, almanac and time, reducing the time to first fix significantly and improving acquisition sensitivity. The u-blox M8 generation extends validities of AssistNow Offline data (up to 35 days) and AssistNow Autonomous data (up to 6 days), providing the benefits of faster acquisition for longer durations since last use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eConcurrent reception of GPS\/QZSS, GLONASS, BeiDou\u003c\/li\u003e\n\u003cli\u003eMarket leading acquisition and tracking sensitivity\u003c\/li\u003e\n\u003cli\u003eOptimized accuracy and availability with Survey-in and single-satellite timing\u003c\/li\u003e\n\u003cli\u003eMinimized power consumption with low duty-cycle operation\u003c\/li\u003e\n\u003cli\u003eMaximized reliability with Integrity monitoring and alarms\u003c\/li\u003e\n\u003cli\u003eMulti-GNSS Raw data, IMES Message data\u003c\/li\u003e\n\u003cli\u003eBackward compatible with LEA-5T, LEA-6T and NEO-6T\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003eUART, I2C and USB interfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x32 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gr.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848074051916,"sku":"ELT0017","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/53.jpg?v=1762282308"},{"product_id":"elt0018","title":"LEA-M8S GPS breakout board designs to multi‑GNSS","description":"\u003ch5\u003e\u003cstrong\u003e\u003cspan style=\"font-size: 14px;\"\u003eGPS LEA-M8S GPS breakout board designed for multi GNSS description\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h5\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848076673356,"sku":"ELT0018","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/54.jpg?v=1762282328"},{"product_id":"elt0019","title":"LEA-M8F time \u0026 frequency reference breakout board","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8F GPS, Glonass, Beidou breakout board with time \u0026amp; frequency reference description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis time and frequency products provide multi-GNSS synchronization for cost-sensitive network edge equipment including Small Cell and Femto wireless base-stations. The LEA-M8F module is a fully self-contained phase and frequency reference based on GNSS, but can also be used as part of a complete timing sub-system including macro-sniff Synchronous Ethernet and packet timing.\u003c\/p\u003e\n\u003cp\u003eThe LEA-M8F module includes a low-noise 30.72 MHz VCTCXO meeting the master reference requirements for LTE Small Cells and provides 100 ppb autonomous hold-over. The LEA-M8F module can also measure and control an external TCXO or OCXO for TD-LTE, LTE Advanced and other applications requiring extended hold-over. External sources of synchronization are supported through time-pulse and frequency inputs and a message interface.\u003c\/p\u003e\n\u003cp\u003eThis allows measurements from macro-sniff, Sync-E or packet timing to be combined with measurements from GNSS. u-blox time and frequency products include timing integrity alarms that report phase and frequency uncertainty both during normal operation and hold-over. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848077656396,"sku":"ELT0019","price":89.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/55.jpg?v=1762282347"},{"product_id":"elt0020","title":"MAX-M8Q GPS\/QZSS GLONASS BeiDou 18Hz receiver with Antenna","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS\/QZSS GLONASS BeiDou 18Hz receiver Reference Board with Active GPS antenna for your mini UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements. The MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 concurrent GNSS receiver GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1, SBAS L1 C\/A: WAAS, EGNOS, MSAS\u003c\/li\u003e\n\u003cli\u003eSensitivity: Tracking -167dBm Nav –164 dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART(Tx,Rx) interface\u003c\/li\u003e\n\u003cli\u003eActive high gain GPS antenna\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 34x14 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848078573900,"sku":"ELT0020","price":55.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/69.jpg?v=1762282367"},{"product_id":"elt0021","title":"MAX-M8Q GPS GLONASS BeiDou 18Hz NANO receiver with UF.L connector","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS\/QZSS GLONASS BeiDou 18Hz NANO receiver Reference Board with UF.L (IPEX) antenna connector for your mini UAV systems, Robots, RC, FPV or other projects. Ultra small and light. Nail size.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 concurrent GNSS receiver GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1, SBAS L1 C\/A: WAAS, EGNOS, MSAS\u003c\/li\u003e\n\u003cli\u003eSensitivity: Tracking -167dBm Nav –164 dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART (Tx, Rx) and I2C interface on 1,27mm pitch pins\u003c\/li\u003e\n\u003cli\u003eUF.L (I-PEX) antenna connector\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 20x10 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848081031500,"sku":"ELT0021","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/66.jpg?v=1762282388"},{"product_id":"elt0024","title":"MAX-M8Q Mic GPS GNSS LIS3MDL SAW LNA Triple Band ANT","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna + Triple Band Pass filter and LNA\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8Q Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The MAX-M8Q Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the MAX-M8Q breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the MAX-M8Q with LIS3MDL Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (MAX-M8Q)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART (Tx, Rx) and I2C (SDA, SCL)(for LIS3MDL) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eTriple band Band Pass filter\u003c\/li\u003e\n\u003cli\u003eTriple Band LNA\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 I2C port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start and settings storage\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 25x25 mm; hole distance 22x22mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eBest performance for this weight and size!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848082997580,"sku":"ELT0024","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/74.jpg?v=1762282408"},{"product_id":"elt0026","title":"LEA-M8S GPS\/QZSS GLONASS BeiDou module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8S Reference Board with sma connectors for active GPS antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8S breakout Evaluation board makes evaluating the high performance of the u-blox 8 GPS\/QZSS, GLONASS, BeiDou positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The LEA-M8S breakout is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the LEA-M8S breakout can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the LEA-M8S integrated sma connectors for High Gain GPS antenna.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LEA-M8S module delivers concurrent GNSS location capability together with high-performance u-blox M8 positioning technology in the industry proven LEA form factor. With its dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest number of visible satellites from two of the GNSS systems (GPS, GLONASS and BeiDou) for more reliable positioning. The LEA-M8S provides exceptional performance with low system power, and is optimized for cost sensitive applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply \u0026amp; Data Link via USB\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Device\/USB V2.0 compatible\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBattery holder for 3 V type 621 Lithium battery (HOT module start)\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 USB port, 1 TTL UART port, 1 RS-232 port\u003c\/li\u003e\n\u003cli\u003eTime pulse output LED and pin for time synhronization\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848088928588,"sku":"ELT0026","price":62.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/78.jpg?v=1762282443"},{"product_id":"elt0029","title":"LEA-M8T GPS\/QZSS GLONASS BeiDou Timing and RAW data module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8T GPS\/QZSS, GLONASS, BeiDou Timing and RAW data EVAL module with USB, UART, RS-232 interface and with SMA connector for active GPS antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8T Evaluation board makes evaluating the high performance of the u-blox 8 GPS\/QZSS, GLONASS, BeiDou positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The LEA-M8T Evaluation board is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the LEA-M8T Evaluation board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the LEA-M8T with integrated sma connectors for High Gain GPS antenna.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848091124044,"sku":"ELT0029","price":98.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/80.jpg?v=1762282480"},{"product_id":"elt0030","title":"LEA-M8F time \u0026 frequency reference GNSS EVAL module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8F GPS, Glonass, Beidou receiver with time \u0026amp; frequency reference. Ready to use EVAL module\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8F module is a fully self-contained phase and frequency reference based on GNSS, but can also be used as part of a complete timing sub-system including macro-sniff Synchronous Ethernet and packet timing. The LEA-M8F module includes a low-noise 30.72 MHz VCTCXO meeting the master reference requirements for LTE Small Cells and provides 100 ppb autonomous hold-over. The LEA-M8F module can also measure and control an external TCXO or OCXO for TD-LTE, LTE Advanced and other applications requiring extended hold-over. External sources of synchronization are supported through time-pulse and frequency inputs and a message interface. This allows measurements from macro-sniff, Sync-E or packet timing to be combined with measurements from GNSS. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply \u0026amp; Data Link via USB\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Device\/USB V2.0 compatible\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003eActive and Passive Antenna support\u003c\/li\u003e\n\u003cli\u003eu-center Evaluation Software\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 USB port, 1 TTL UART port, 1 SPI port\u003c\/li\u003e\n\u003cli\u003eTime pulse output LED and pin for time synhronization\u003c\/li\u003e\n\u003cli\u003eSDA SCL Pin for external DAC\u0026gt;\u003c\/li\u003e\n\u003cli\u003e38.72MHz oscillator out\u003c\/li\u003e\n\u003cli\u003eTwo Freq Phase in for external oscillator control\u003c\/li\u003e\n\u003cli\u003ePCB Size 33x31 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848091484492,"sku":"ELT0030","price":129.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/81.jpg?v=1762282500"},{"product_id":"elt0031","title":"NEO-M8N GPS GNSS receiver board with SMA and mini USB for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEW version with USB type C connectors available\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/ELT0331\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0331\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNEO-M8N Reference Board with SMA antenna connector and mini USB for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox u-blox M8 GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA,SCL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003emini USB connector\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e \u003c\/a\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 I2C port,1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848092041548,"sku":"ELT0031","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/83.jpg?v=1762282520"},{"product_id":"elt0035","title":"NEO-M8N GPS GNSS receiver board with SMA for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003e6 pin and 4 pin JST SH connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848097644876,"sku":"ELT0035","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/91.jpg?v=1762282592"},{"product_id":"elt0039","title":"NEO-M8N GPS GNSS Beidou Triple Band Antenna EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection. Ready for unwanted signal interference or multipath blocking. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848103379276,"sku":"ELT0039","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/95.jpg?v=1762282659"},{"product_id":"elt0045","title":"NEO-M8N Triple Band receiver EMI and RFI protection LIS3MDL PRO version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI and RFI protection + LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. PRO Version.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have Double LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eDouble LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848113799500,"sku":"ELT0045","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/108.jpg?v=1762282752"},{"product_id":"elt0053","title":"NEO-M8N InCase series GPS GNSS receiver board for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8N Reference Board with UF.L antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848126611788,"sku":"ELT0053","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2258.jpg?v=1762282903"},{"product_id":"elt0058","title":"NEO-M8N Dual Band receiver with EMI and RFI protection + LIS3MDL and Tallysman antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Dual Band receiver GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848134246732,"sku":"ELT0058","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/138.jpg?v=1762282995"},{"product_id":"elt0060","title":"NEO-M8P RTK receiver Base or Rover EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 Precise Point Positioning receiver X series version with SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for RTK. Very strong signal for good price. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eBoard can be used for a Base or Rover operation mode! This board designed for large scale drone or groud robots. Board have high gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. The NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance. The NEO-M8P modules enable the system integrator to access u-blox’s complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA,SCL) for magnetometer, UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848138703180,"sku":"ELT0060","price":229.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/143.jpg?v=1762283031"},{"product_id":"elt0061","title":"NEO-M8N Triple Band receiver with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. X series version very strong signal for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have High Gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, UART (Tx, Rx), I2C for LIS3MDL\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100mm; hole distance 90x90mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848139915596,"sku":"ELT0061","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/146.jpg?v=1762283053"},{"product_id":"elt0068","title":"NEO-M8N InCase PIN series GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151122252,"sku":"ELT0068","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2261.jpg?v=1762283184"},{"product_id":"elt0069","title":"NEO-M8N Triple Band receiver with EMI protection LIS3MDL XXL version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection + LIS3MDL Magnetometr. Ready for unwanted signal interference or multipath blocking. XXL Version\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151712076,"sku":"ELT0069","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/168.jpg?v=1762283207"},{"product_id":"elt0073","title":"NEO-M8N Mini GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154693964,"sku":"ELT0073","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/179.jpg?v=1762283283"},{"product_id":"elt0077","title":"NEO-M8P RTK GNSS receiver board with SMA and mini USB Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology. The NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments.\u003c\/p\u003e\n\u003cp\u003eThe base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies. The NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P modules enable the system integrator to access u-blox complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 highlights:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup battery holder\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x20 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFully assembled and ready to use\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159117644,"sku":"ELT0077","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/188.jpg?v=1762283359"},{"product_id":"elt0078","title":"NEO-M8P RTK GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 High Precision GNSS receiver EVAL module USB type A connector, I2C, UART, SPI with SMA antenna connectors. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox Real Time Kinematic (RTK) technology. The NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P modules enable the system integrator to access u-blox complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u-blox RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 highlights:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup battery holder\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x20 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159281484,"sku":"ELT0078","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/191.jpg?v=1762283380"},{"product_id":"elt0079","title":"NEO-M8N GPS GNSS BeiDou + LIS3MDL Triple Band 35mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass, Triple band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA, SCL)(for LIS3MDL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 50x50 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 29 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848159904076,"sku":"ELT0079","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/195.jpg?v=1762283399"},{"product_id":"elt0084","title":"NEO-M8N GPS GNSS USB dongle receiver with SMA.","description":"\u003cp\u003e\u003cstrong\u003eNEO-M8N USB dongle receiver with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N USB dongle makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N USB dongle is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N USB receiver can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested USB dongle with the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color:#2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\" style=\"color:#2445a2;\" rel=\"noreferrer noopener\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 75x25x13 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848162296140,"sku":"ELT0084","price":76.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/204.jpg?v=1762283490"},{"product_id":"elt0087","title":"ZED-F9P RTK GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW USB type C Pin to Pin compatible version available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" class=\"btn btn-default\" href=\"\/products\/elt0387\"\u003eELT0387\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-receivers\/what-is-the-principle-behind-rtk-gnss\"\u003eRTK technology\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003efor more details. Please note, using L5 band require\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA ,SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848164819276,"sku":"ELT0087","price":209.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848164852044,"sku":"ELT0087-L1L5","price":209.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/213.jpg?v=1762283547"},{"product_id":"elt0088","title":"ZED-F9T-00B high accuracy timing module with SMA","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9T high accuracy timing EVAL module USB, I2C, UART, SPI with SMA antenna connectors.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNEW USB C pin to pin compatible version available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" class=\"btn btn-default\" href=\"https:\/\/gnss-store.myshopify.com\/products\/zed-f9t-00b-high-accuracy-usb-c-timing-module-with-sma?variant=55851807736140\"\u003eELT0388\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. ZED-F9T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale. By significantly reducing the time error of the primary source of cellular network synchronization, the ZED-F9T will help operators maximize the performance of their networks and so optimize the return on their investment in 5G communications. The timing module’s multi-band capability reduces the timing error under clear skies to less than 5 ns without the need for an external GNSS correction service.\u003c\/p\u003e\n\u003cp\u003eTo further improve accuracy locally, the ZED-F9T features differential timing modes that exchange correction data with other neighboring GNSS timing receivers via a communication network. Multi-band access to all four satellite constellations strengthens the receiver’s capability for delivering more reliable performance. ZED-F9T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity. The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848164884812,"sku":"ELT0088","price":209.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/219.jpg?v=1762283566"},{"product_id":"elt0089","title":"ZED-F9P RTK receiver board with MultiBand antenna L1, L2 and EMI protection + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver module with USB, I2C, UART, SPI interfaces and Multi Band L1, L2 antenna. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Build-in EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eMultiBand L1, L2 antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 70x70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 56 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector and 4 pin JST for LIS3MDL magnetometr\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848165179724,"sku":"ELT0089","price":249.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/220.jpg?v=1762283588"},{"product_id":"elt0090","title":"ZED-F9T high accuracy timing board with MultiBand antenna L1 L2 and EMI protection + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9T high accuracy timing module GNSS receiver module with USB, I2C, UART, SPI interfaces and Multi Band L1 L2 antenna. Build-in EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. ZED-F9T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale. By significantly reducing the time error of the primary source of cellular network synchronization, the ZED-F9T will help operators maximize the performance of their networks and so optimize the return on their investment in 5G communications.\u003c\/p\u003e\n\u003cp\u003eThe timing module’s multi-band capability reduces the timing error under clear skies to less than 5 ns without the need for an external GNSS correction service. To further improve accuracy locally, the ZED-F9T features differential timing modes that exchange correction data with other neighboring GNSS timing receivers via a communication network. Multi-band access to all four satellite constellations strengthens the receiver’s capability for delivering more reliable performance. ZED-F9T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity. The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eMultiBand L1 L2 antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 70x70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 56 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector and 4 pin JST for LIS3MDL magnetometr\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848165802316,"sku":"ELT0090","price":249.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/223.jpg?v=1762283609"},{"product_id":"elt0091","title":"ZED-F9P RTK GNSS receiver board with GNSS Active Quad Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options.Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. With High Performance Multiband GNSS Active Quad Helix Antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (\u003cspan\u003e\u003ca href=\"\/pages\/search-results-page?q=ZED-F9P-15B\"\u003eZED-F9P-15B\u003c\/a\u003e\u003c\/span\u003e). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848167506252,"sku":"ELT0091","price":278.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848167539020,"sku":"ELT0091-L1L5","price":278.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/230.jpg?v=1762283645"},{"product_id":"elt0092","title":"ZED-F9P RTK InCase PIN GNSS receiver board with SMA Base or Rover","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eI2C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(SDA, SCL),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSPI\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand 2\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUART\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eedge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55848168030540,"sku":"ELT0092","price":189.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55848168063308,"sku":"ELT0092-L1L5","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2263.jpg?v=1776145931"},{"product_id":"elt0094","title":"ZED-F9T 5G Network Synchronization RTK InCase PIN timing module SMA","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9T high accuracy timing EVAL module USB, I2C, UART, SPI with SMA antenna connectors. Designed for 5G Network Synchronization. Two time pulse out.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. ZED-F9T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale. By significantly reducing the time error of the primary source of cellular network synchronization, the ZED-F9T will help operators maximize the performance of their networks and so optimize the return on their investment in 5G communications.\u003c\/p\u003e\n\u003cp\u003eThe timing module’s multi-band capability reduces the timing error under clear skies to less than 5 ns without the need for an external GNSS correction service. To further improve accuracy locally, the ZED-F9T features differential timing modes that exchange correction data with other neighboring GNSS timing receivers via a communication network. Multi-band access to all four satellite constellations strengthens the receiver’s capability for delivering more reliable performance. ZED-F9T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity. The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface, Two time pulse out\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulses 1 and 2: Green LED, GEO: Orange LED, RTK: Red LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 pin holes connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848168128844,"sku":"ELT0094","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2264.jpg?v=1762283682"},{"product_id":"elt0095","title":"ZED-F9T 5G Network Synchronization USB Dongle with SMA time pulse out","description":"\u003cp\u003e\u003cstrong\u003eZED-F9T USB high accuracy timing dongle. USB interface and SMA antenna and time pulse out connectors. Designed for 5G Network Synchronization.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. ZED-F9T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale. By significantly reducing the time error of the primary source of cellular network synchronization, the ZED-F9T will help operators maximize the performance of their networks and so optimize the return on their investment in 5G communications.\u003c\/p\u003e\n\u003cp\u003eThe timing module’s multi-band capability reduces the timing error under clear skies to less than 5 ns without the need for an external GNSS correction service. To further improve accuracy locally, the ZED-F9T features differential timing modes that exchange correction data with other neighboring GNSS timing receivers via a communication network. Multi-band access to all four satellite constellations strengthens the receiver’s capability for delivering more reliable performance. ZED-F9T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity. The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface, Time pulse out\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA time pulse connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848168718668,"sku":"ELT0095","price":219.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/250.jpg?v=1762283704"},{"product_id":"elt0096","title":"ZED-F9H high precision GNSS InCase PIN module for heading applications","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver InCase PIN EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations. ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x23 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848168948044,"sku":"ELT0096","price":174.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/2265.jpg?v=1776146366"},{"product_id":"elt0098","title":"ZED-F9H high precision GNSS module for heading applications: SMA, USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9H High Precision GNSS receiver EVAL module USB, I2C, UART, SPI with SMA antenna connectors designed for heading applications. Designed for easy integration in your system or robots.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNEW USB type C Pin to Pin compatible version available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/elt0398\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003eELT0398\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9H module is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information.\u003cbr\u003eAs the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.\u003cbr\u003eZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interfaces\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x22 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848170455372,"sku":"ELT0098","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/265.jpg?v=1762283759"},{"product_id":"elt0099","title":"NEO-M9N four GNSS receiver + LIS3MDL Compass 35mm antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver + LIS3MDL Compass with 35mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M9N with Compass\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848171798860,"sku":"ELT0099","price":64.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/270.jpg?v=1762283778"},{"product_id":"elt0100","title":"NEO-M9N four GNSS receiver with 35mm Antenna and EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver with 35mm with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e35mm High Gain ceramic patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, AssistNow Autonomous (up to 6 days) OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19027207\" style=\"color: #2445a2;\"\u003eNEO-M9N Product Summary\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19014285\" style=\"color: #2445a2;\"\u003eNEO-M9N Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-19014286\" style=\"color: #2445a2;\"\u003eNEO-M9N Integration Manual\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\" style=\"color: #2445a2;\"\u003eu-blox M9 SPG 4.00 firmware\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848172683596,"sku":"ELT0100","price":70.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/272.jpg?v=1762283798"},{"product_id":"elt0101","title":"NEO-M9N four GNSS receiver board with SMA for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available \u003c\/strong\u003e\u003c\/span\u003e\u003ca class=\"btn btn-default\" href=\"\/products\/ELT0401\"\u003e\u003cb\u003e\u003cspan style=\"color: #2445a2;\"\u003eELT0401\u003c\/span\u003e\u003c\/b\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA, SCL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMA\u003c\/strong\u003e antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-centre ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFully assembled and ready to use\u003c\/strong\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848173076812,"sku":"ELT0101","price":58.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/277.jpg?v=1762283819"},{"product_id":"elt0102","title":"NEO-M9N four GNSS receiver + LIS3MDL Compass 25mm antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS mini receiver + LIS3MDL Compass with 25 mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M9N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) (for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/content.u-blox.com\/sites\/default\/files\/JU_EXT_404.907640e53126add7de4708d754b575ef.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848177140044,"sku":"ELT0102","price":65.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/284.webp?v=1763466493"},{"product_id":"elt0103","title":"NEO-M9N four GNSS USB dongle receiver with SMA","description":"\u003cp\u003e\u003cstrong\u003eNEO-M9N four GNSS USB dongle receiver with SMA with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NEO-M9N USB dongle makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N USB dongle is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N USB receiver can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested USB dongle with the NEO-M9N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 75x25x13 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\" style=\"color: #2445a2;\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848177697100,"sku":"ELT0103","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/1377a.jpg?v=1763481534"},{"product_id":"elt0104","title":"NEO-M9N four GNSS receiver with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M9N four GNSS PRO version receiver with double SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. X series version very strong signal for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have High Gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SDL) (for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm; hole distance 90x90mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848178319692,"sku":"ELT0104","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/290.jpg?v=1763466901"},{"product_id":"elt0105","title":"NEO-M9N four GNSS receiver with 50mm full band L1 L2 L5 Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS receiver with 50mm full band L1 L2 L5 Antenna and EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003e50mm High Gain L1 L2 L5 full band patch antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, AssistNow Autonomous (up to 6 days) OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 76,5 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851724898636,"sku":"ELT0105","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/295.jpg?v=1762315437"},{"product_id":"elt0107","title":"NEO-M9N four GNSS receiver board with SMA designed for Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light. Designed to use together with Helix antenna. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N Evaluation board makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.\u003c\/p\u003e\n\u003cp\u003eFurthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with SMA antenna connectors. Best to use with Helix antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9 gr.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFully assembled and ready to use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis board sells without antenna!\u003c\/strong\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725095244,"sku":"ELT0107","price":59.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/305.jpg?v=1762315467"},{"product_id":"elt0108","title":"NEO-M9N four GNSS receiver board set with Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS set with Helix Antenna for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N set makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M9N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M9N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M9N with Helix antenna.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e92-channel u-blox M9 engine GPS L1 C\/A, QZSS L1 C\/A\/S, GLONASS L10F BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGANv\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25 gr. with mounted antenna\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eHelix Antenna included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e\u003cstrong\u003eHelix Antenna Features:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eQuadrifilar helix antenna\u003c\/li\u003e\n\u003cli\u003eConcurrent GNSS reception on GPS, GLONASS, Galileo and Beidou\u003c\/li\u003e\n\u003cli\u003eRugged IP67 rating with SMA mount\u003c\/li\u003e\n\u003cli\u003eSmall form factor\u003c\/li\u003e\n\u003cli\u003eGround plane independent\u003c\/li\u003e\n\u003cli\u003eGIS, RTK and other high accuracy GNSS applications\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eLow phase center variation over azimuth and elevation and among different samples\u003c\/li\u003e\n\u003cli\u003eUltra-lightweight about 17-19 gramm\u003c\/li\u003e\n\u003cli\u003eDimension 55x25mm\u003c\/li\u003e\n\u003cli\u003eAutomotive grade electronics\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/ubx-viewer\/view\/UBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin?url=https%3A%2F%2Fwww.u-blox.com%2Fsites%2Fdefault%2Ffiles%2FUBX_M9_400_SPG.809ed6273c701f5d6c1ca2bf97758d23.bin\"\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725160780,"sku":"ELT0108","price":137.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/311.jpg?v=1762315487"},{"product_id":"elt0110","title":"ZED-F9P RTK GNSS USB Dongle with SMA antenna and SMA time pulse out","description":"\u003cp\u003e\u003cstrong\u003eZED-F9P High Precision GNSS USB dongle with SMA antenna connectors and time pulse SMA connectors. L1\/L2 or L1\/L5 options. Multi-band receiver delivers centimeter-level accuracy in seconds.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB interface\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA time pulse out connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003e\u003cspan\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions with connectors: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851725750604,"sku":"ELT0110","price":219.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851725783372,"sku":"ELT0110-L1L5","price":219.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/318.jpg?v=1762315528"},{"product_id":"elt0111","title":"ZED-F9H high precision GNSS dongle for heading applications with SMA","description":"\u003cp\u003e\u003cstrong\u003eZED-F9H High Precision GNSS USB dongle with SMA antenna connectors and SMA time pulse out. Designed for heading applications.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9H dongle is designed to provide best possible heading information to applications where precise attitude is of greatest importance. The ZED-F9H acts as an accompanying module, and requires a ZED-F9P module to be mounted on the same vehicle. In this setup, ZED-F9P provides the precise GNSS position, and at the same time acts as a moving base to the ZED-F9H module, which in turn outputs the precise attitude information. As the heading information is based on GNSS it does not require pre-calibration, thus ensuring easy production, integration and operation. The precise heading information is always available, even in stand-still situations.ZED-F9H is designed to lower the system cost for a heading application and comes with minimal e-BOM. Thanks to its small package size, light weight, and low power consumption it is well-suited for mass market adoption.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB  interface with A-type connector\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003eSMA edge timepulse connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\" rel=\"noreferrer noopener\"\u003e\u003cspan style=\"color:#2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, Power LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 85x30x15 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851725848908,"sku":"ELT0111","price":204.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/321.jpg?v=1762315546"},{"product_id":"elt0112","title":"ZED-F9P RTK InCase PIN GNSS receiver board with SMA and USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver InCase PIN EVAL module with USB, I2C, UART, SPI with SMA antenna connectors. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Designed for easy integration in your system or robots. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNew pin to pin compatible version with USB type C available\u003c\/span\u003e\u003c\/strong\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/gnss-store.myshopify.com\/products\/elt0412?variant=55851803541836\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0412\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003especial configuration\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/h5\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eSMA edge antenna connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x30 mm without SMA\u003c\/li\u003e\n\u003cli\u003eWeight: 11 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e14 Holes with pitch 2.54mm\u003c\/li\u003e\n\u003cli\u003eMini USB connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851726111052,"sku":"ELT0112","price":189.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851726143820,"sku":"ELT0112-L1L5","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/324.jpg?v=1762315565"},{"product_id":"elt0113","title":"ZED-F9T 5G Network Synchronization InCase PIN timing module SMA USB","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9T high accuracy timing EVAL module USB, I2C, UART, SPI with SMA antenna connectors. Designed for 5G Network Synchronization. Two time pulse out.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #218e53;\"\u003eNEW pin to pin compatible version with USB type C connector available\u003c\/span\u003e\u003c\/strong\u003e \u003ca class=\"btn btn-default\" href=\"\/products\/elt0413\"\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0413\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9T timing module provides nanosecond-level timing accuracy to the most demanding infrastructure applications. ZED-F9T is designed to meet the most stringent timing synchronization requirements in 5G mobile networks on a global scale. By significantly reducing the time error of the primary source of cellular network synchronization, the ZED-F9T will help operators maximize the performance of their networks and so optimize the return on their investment in 5G communications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003eThe timing module’s multi-band capability reduces the timing error under clear skies to less than 5 ns without the need for an external GNSS correction service. To further improve accuracy locally, the ZED-F9T features differential timing modes that exchange correction data with other neighboring GNSS timing receivers via a communication network. Multi-band access to all four satellite constellations strengthens the receiver’s capability for delivering more reliable performance. ZED-F9T includes advanced security features such as secure boot, secure interfaces, and T-RAIM to provide the highest level timing integrity. The module has a single RF input for all the GNSS bands and dual SAW filters for exceptional signal selectivity and out-ofband attenuation.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726209356,"sku":"ELT0113","price":189.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/329.jpg?v=1762315584"},{"product_id":"elt0114","title":"NEO-M9N four GNSS USB receiver for Stratux ADS-B Aviation Receiver","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M9N four GNSS USB receiver for Stratux ADS-B Dual Band Weather and Traffic Aviation receiver with 25 mm ceramic patch antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M9N receiver makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726307660,"sku":"ELT0114","price":58.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/332.jpg?v=1762315603"},{"product_id":"elt0115","title":"NEO-M8N USB receiver for Stratux ADS-B Aviation Receiver","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Dual Band receiver GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55851726373196,"sku":"ELT0115","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/334.jpg?v=1762315623"},{"product_id":"elt0118","title":"ZED-F9P RTK receiver board with MultiBand antenna L1, L2 with EMI protection + LIS3MDL","description":"\u003ch5\u003e\u003cstrong\u003eZED-F9P High Precision GNSS receiver module with USB, I2C, UART, SPI interfaces and GPS L1, L2, GLONASS, Galileo and BeiDou Operation antenna. L1\/L2 or L1\/L5 options. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Build-in EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.\u003c\/p\u003e\n\u003cp\u003eTwo module options offered - with L1\/L2 bands (ZED-F9P) and with L1\/L5 bands (ZED-F9P-15B). L1\/L5 option will work better in urban canyon and similar complex environment. Read our blog article \u003cspan\u003e\u003ca href=\"\/blogs\/gnss-antennas\/what-is-better-l2-or-l5-band\"\u003eL2 or L5?\u003c\/a\u003e\u003c\/span\u003e for more details. Please note, using L5 band require \u003ca href=\"https:\/\/www.u-blox.com\/sites\/default\/files\/documents\/GPS-L5-configuration_AppNote_UBX-21038688.pdf\"\u003e\u003cspan\u003especial configuration\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.\u003c\/p\u003e\n\u003cp\u003eZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBoard can be used for a Base or Rover operation mode!\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator with noise 2nV\/Hz\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL), SPI and 2 UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eMultiBand GPS L1, L2, GLONASS, Galileo and BeiDou Operation antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noreferrer noopener\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003e\u003cspan\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 70x70 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79,5 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 JST SH connector and 4 pin JST for LIS3MDL magnetometr\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"L1\/L2: ZED-F9P","offer_id":55851727520076,"sku":"ELT0118","price":259.99,"currency_code":"EUR","in_stock":true},{"title":"L1\/L5: ZED-F9P-15B","offer_id":55851727552844,"sku":"ELT0118-L1L5","price":259.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/346.jpg?v=1762315684"}],"url":"https:\/\/gnss.store\/collections\/brands.oembed?page=8","provider":"GNSS Store","version":"1.0","type":"link"}