{"title":"All GNSS products","description":"\u003ch2\u003eExplore Our GNSS Product Range\u003c\/h2\u003e\n\n\u003cp\u003eOur extensive collection is organized to support every stage of your project development:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGNSS Modules \u0026amp; Boards:\u003c\/strong\u003e High-precision RTK, Timing, and Heading modules from industry leaders like \u003cstrong\u003eu-blox\u003c\/strong\u003e, \u003cstrong\u003eSeptentrio\u003c\/strong\u003e, and \u003cstrong\u003eUnicore\u003c\/strong\u003e. Perfect for OEM integration and custom hardware development.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Band Antennas:\u003c\/strong\u003e A diverse range of RTK antennas, including Helix, Patch, Choke Ring, and Cross-dipole designs, optimized for clean signal reception in any environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosed \u0026amp; Plug-and-Play Solutions:\u003c\/strong\u003e Field-ready \u003cstrong\u003eUSB GNSS dongles\u003c\/strong\u003e, Smart Antennas, and \u003cstrong\u003eOnocoy miners\u003c\/strong\u003e designed for immediate deployment without soldering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialized Kits:\u003c\/strong\u003e Handheld RTK surveyor kits, Ethernet-based base stations, and development evaluation kits to accelerate your time-to-market.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIndustrial Applications\u003c\/h3\u003e\n\u003cp\u003eWhether you are focused on \u003cstrong\u003eUAV robotics\u003c\/strong\u003e, \u003cstrong\u003eprecision agriculture\u003c\/strong\u003e, \u003cstrong\u003eautonomous vehicles\u003c\/strong\u003e, or \u003cstrong\u003egeospatial mapping\u003c\/strong\u003e, our hardware supports the latest GPS, GLONASS, Galileo, and BeiDou constellations. We provide \u003cstrong\u003eNDAA-compliant\u003c\/strong\u003e solutions and professional technical support to ensure your positioning strategy is future-proof and reliable.\u003c\/p\u003e","products":[{"product_id":"elt0001","title":"32 AWG silver plated TEFLON wire 1 m","description":"\u003ch5 style=\"margin-bottom: 0.8rem;\"\u003e\u003cstrong\u003eSpecifications of 32 AWG TEFLON wire:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cul style=\"margin-top: 0;\"\u003e\n\u003cli\u003eConductor size 32 AWG\u003c\/li\u003e\n\u003cli\u003eConductor area 0.03 mm²\u003c\/li\u003e\n\u003cli\u003eSheath material TEFLON\u003c\/li\u003e\n\u003cli\u003eConductor material Silver-plated copper\u003c\/li\u003e\n\u003cli\u003eOutside diameter 0.56 mm\u003c\/li\u003e\n\u003cli\u003eThe package includes one meter of silver plate TEFLON wire 0.15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848036925772,"sku":"ELT0001","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/32-awg-silver-plated-teflon-wire-1-m-9805046.jpg?v=1782567982"},{"product_id":"elt0002","title":"6 pin JST SH Wire Assembly 0.1 m","description":"\u003ch5\u003e\u003cstrong\u003e6-pin JST SH 1mm connector with 10 cm wires\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH 1mm connector on the other end with a mating socket.\u003c\/p\u003e\n\u003cp\u003eDimensions: 0.1 m length.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848039776588,"sku":"ELT0002","price":1.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/6-pin-jst-sh-wire-assembly-01-m-5960433.jpg?v=1782567984"},{"product_id":"elt0003","title":"4 pin to 4 pin JST SH Wire Assembly 0.1 m","description":"\u003ch5\u003e\u003cstrong\u003eThis is a simple 4 wire jumper cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have 4 pin JST SH connectors on two end.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDimensions: 0.1 m length.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848040530252,"sku":"ELT0003","price":1.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/4-pin-to-4-pin-jst-sh-wire-assembly-01-m-9091154.jpg?v=1782567983"},{"product_id":"elt0004","title":"12 pin to 12 pin JST SH Wire Assembly 0.1 m","description":"\u003ch5\u003e\u003cstrong\u003e12 pin to 12 pin JST SH Wire Assembly.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDimensions: 0.1 m length.\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848043643212,"sku":"ELT0004","price":5.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/12-pin-to-12-pin-jst-sh-wire-assembly-01-m-2493106.jpg?v=1782567984"},{"product_id":"elt0005","title":"3 meter USB to mini USB cable 3 m","description":"\u003ch5\u003e\u003cstrong\u003eThis is a simple 3 m USB to mini USB wire cable. Very good for GPS or RTK boards.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDimensions: 3 m length.\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55848048099660,"sku":"ELT0005","price":4.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/3-meter-usb-to-mini-usb-cable-3-m-6617774.jpg?v=1782567979"},{"product_id":"elt0007","title":"USB to 4 pin JST SH Board","description":"\u003ch5\u003e\u003cstrong\u003eThis is a simple board converter USB to 4 pin JST SH connector.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDimensions: 12x18 mm\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848055669068,"sku":"ELT0007","price":3.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/usb-to-4-pin-jst-sh-board-1979472.jpg?v=1782567980"},{"product_id":"elt0008","title":"InCase GPS series USB and breakout board","description":"\u003ch5\u003e\u003cstrong\u003eInCase GPS series USB and breakout board with USB and pins.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eDesigned for easy start with InCase Series GPS modules. Can be used together with \u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"\/products\/elt0004\"\u003e12 pin JST cable\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848057897292,"sku":"ELT0008","price":4.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/incase-gps-series-usb-and-breakout-board-2732233.jpg?v=1782567980"},{"product_id":"elt0009","title":"InCase PIN GPS series USB breakout board","description":"\u003ch5\u003e\u003cstrong\u003eInCase GPS series USB and breakout board with USB and pins. Designed for easy start with InCase PIN Series GPS modules.\u003c\/strong\u003e\u003c\/h5\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848060715340,"sku":"ELT0009","price":3.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/incase-pin-gps-series-usb-breakout-board-8250914.jpg?v=1782567982"},{"product_id":"elt0010","title":"FTDI USB to Serial FT232RL board 3.3V and 5V level compatible","description":"\u003ch5\u003e\u003cstrong\u003eBasic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM. Based on the FTDI FT232RL IC. VCCIO is now tied to 3.3V through a solder jumper. You have the option of clearing this jumper and tying the VCCIO pin to 5V for 3.3V and 5V сompatibility.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eImplements full v2.0 USB protocol\u003c\/li\u003e\n\u003cli\u003eNeeds no external crystal\u003c\/li\u003e\n\u003cli\u003eInternal EEPROM for device ID and Product Description strings\u003c\/li\u003e\n\u003cli\u003eRoyalty-Free Driver support for Windows, Linux, and Mac OSX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003ePackage include:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cp\u003e1x FTDI USB to Serial board\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848062320972,"sku":"ELT0010","price":10.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ftdi-usb-to-serial-ft232rl-board-33v-and-5v-level-compatible-6712565.jpg?v=1782567978"},{"product_id":"elt0011","title":"L1 High performance active GPS antenna","description":"\u003ch5\u003e\u003cstrong\u003eHigh performance active GPS antenna description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe high performance active GPS antenna for the GPS L1 bands with integrated low-noise amplifier (LNA) is the perfect match to the GPS board where high sensitivity and optimum sky coverage are essential.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eSignal Received:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGPS L1\u003c\/li\u003e\n\u003cli\u003eGLONASS G1\u003c\/li\u003e\n\u003cli\u003eSBAS L1\u003c\/li\u003e\n\u003cli\u003eQZSS L1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT0011.png?v=1762282171\" alt=\"High performance active GPS antenna\" width=\"609\" height=\"456\"\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eHigh performance active GPS antenna features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in low noise amplifier with 29 dB gain and 1.8 dB noise figure\u003c\/li\u003e\n\u003cli\u003eCustom lenght coaxial cable up to 5m\u003c\/li\u003e\n\u003cli\u003eIndustrial temperature range: –40° C to +85° C\u003c\/li\u003e\n\u003cli\u003eWide range of supply voltage: 2.7 V to 6 V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003ePatch antenna characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency 1575 ± 3 MHz\u003c\/li\u003e\n\u003cli\u003eVSWR Max. 1.2\u003c\/li\u003e\n\u003cli\u003eBandwidth Min. 20 MHz\u003c\/li\u003e\n\u003cli\u003eImpedance 50\u003c\/li\u003e\n\u003cli\u003ePeak gain Min. 4 dBic (over 7 x 7 cm ground plane)\u003c\/li\u003e\n\u003cli\u003eGain coverage: (over 75% volume)\u003c\/li\u003e\n\u003cli\u003ePolarization RHCP: (Right-handed circular polarization)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eAmplifier characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGain without cable Typ: 29 dB\u003c\/li\u003e\n\u003cli\u003eNoise figure Max.: 1.8 dB\u003c\/li\u003e\n\u003cli\u003eOutput VWSR Max.: 2.0\u003c\/li\u003e\n\u003cli\u003eDC Voltage: 2.7 V – 6 V\u003c\/li\u003e\n\u003cli\u003eDC Current typ: 8.5 mA, ± 4.5 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eEnvironmental Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOperating temperature: –40° C to 85° C\u003c\/li\u003e\n\u003cli\u003eStorage temperature: –50° C to 85° C\u003c\/li\u003e\n\u003cli\u003eHumidity: 95% ~ 100% RH\u003c\/li\u003e\n\u003cli\u003eVibration Sine sweep: 1G (0-Peak), 10–150–10 Hz each axis\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eMechanical Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 42 g (without cable)\u003c\/li\u003e\n\u003cli\u003eSize: 48 x 40 x 13 mm\u003c\/li\u003e\n\u003cli\u003eCable lenght: 5 meters\u003c\/li\u003e\n\u003cli\u003eConnectors: SMA\u003c\/li\u003e\n\u003cli\u003eIngress Protection Rating: IP67\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing color: Black\u003c\/li\u003e\n\u003cli\u003eMounting: magnetic base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"color: #2445a2; margin: 0;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-13003345\"\u003eANN-MS Product Summary\u003c\/a\u003e\u003cbr\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-15025046\"\u003eANN-MS Active GPS Antenna Data Sheet\u003c\/a\u003e\u003cbr\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-15030289\"\u003eGNSS Antennas: RF Design Considerations for u-blox GNSS Receivers\u003c\/a\u003e\u003c\/p\u003e","brand":"GNSS Store","offers":[{"title":"No Ground Plane","offer_id":55848066777420,"sku":"ELT0011","price":24.99,"currency_code":"EUR","in_stock":true},{"title":"Ground Plane","offer_id":55848066810188,"sku":"ELT0011-G","price":32.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/l1-high-performance-active-gps-antenna-5212352.jpg?v=1782567980"},{"product_id":"elt0012","title":"L1\/L2b ANN-MB Multi-Band, High Precision GNSS antenna","description":"\u003ch5\u003e\u003cstrong\u003eANN-MB Multi-Band, High Precision GNSS antenna\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe ANN-MB multi-band (L1, L2\/E5b) active GNSS antennas are designed to reduce time to market for the next generation of high precision GNSS applications, which require highly accurate location abilities. The compact design, excellent price-performance ratio, and versatile mounting and connector choices provide customers with fast, easy, and reliable multi-band antenna solutions. The ANN-MB antenna is a perfect match to the latest u-blox F9 platform including the \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/search?options%5Bprefix%5D=last\u0026amp;q=ZED-F9P+module\" style=\"color: #2445a2;\"\u003eZED-F9P module\u003c\/a\u003e\u003c\/span\u003e, thus providing customers with the valuable antenna solution they need to minimize design-in efforts. IP rating IP67\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eSignal Received:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGPS L1\/L2\u003c\/li\u003e\n\u003cli\u003eGLONASS G1\/G2\/G3\u003c\/li\u003e\n\u003cli\u003eGALILEO E1\/E5b\u003c\/li\u003e\n\u003cli\u003eBDS B1I\/B2I\/B1C\/B2b\u003c\/li\u003e\n\u003cli\u003eSBAS L1\u003c\/li\u003e\n\u003cli\u003eQZSS L1\/L2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT0012.png?v=1762282196\" alt=\"ANN-MB Multi-Band, High Precision GNSS antennas\" width=\"609\" height=\"456\"\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-band (L1, L2\/E5b) active GNSS antennas with excellent price-performance ratio 28 dB\u003c\/li\u003e\n\u003cli\u003eSupports GPS, GLONASS, Galileo, and BeiDou\u003c\/li\u003e\n\u003cli\u003eFast and easy antenna solution for high precision applications\u003c\/li\u003e\n\u003cli\u003eVersatile mounting and connector options\u003c\/li\u003e\n\u003cli\u003eIP rating IP67\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eAmplifier characteristics:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGain without cable 28 ± 3.0 dB\u003c\/li\u003e\n\u003cli\u003eLNA Noise figure Max 3.2 dB\u003c\/li\u003e\n\u003cli\u003eAxial Ratio: 2.0dB max. @Zenith\u003c\/li\u003e\n\u003cli\u003eOutput VWSR Max.: 2.0\u003c\/li\u003e\n\u003cli\u003eDC Voltage: 3 - 5 V\u003c\/li\u003e\n\u003cli\u003eDC Current typ.: 15 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eMechanical Data:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 173 g (without cable)\u003c\/li\u003e\n\u003cli\u003eSize: 82 x 60 x 22.5 mm\u003c\/li\u003e\n\u003cli\u003eCable lenght: 5 meters\u003c\/li\u003e\n\u003cli\u003eConnectors: SMA\u003c\/li\u003e\n\u003cli\u003eHousing color: Black\u003c\/li\u003e\n\u003cli\u003eMounting: magnetic base, screw mount 2 x M4 distance 68 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-18047741\" style=\"color: #2445a2;\" target=\"_blank\"\u003eANN-MB Product Summary\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/docs\/UBX-18049862\" style=\"color: #2445a2;\" target=\"_blank\"\u003eANN-MB Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"No Ground Plane","offer_id":55848069366092,"sku":"ELT0012","price":54.99,"currency_code":"EUR","in_stock":true},{"title":"Ground Plane","offer_id":55848069398860,"sku":"ELT0012-G","price":62.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/l1l2b-ann-mb-multi-band-high-precision-gnss-antenna-8188872.jpg?v=1782567980"},{"product_id":"elt0014","title":"L1\/L2\/L5 High Performance Multiband RTK GNSS Active Quad Helix Antenna","description":"\u003ch5\u003e\u003cstrong\u003eActive Quad Helix Antenna (black) description:\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis is an active multi-frequency, high-accuracy, GNSS antenna for the GPS L1\/L2\/L5, Glonass G1\/G2\/G3, Beidou B1I\/B2I\/B1C\/B2a\/B2b, Galileo E1\/E5a\/E5b, SBAS L1\/L5, QZSS L1\/L2\/L5, IRNSS I5 bands. The antenna is designed for applications requiring greater accuracy than L1-only antennas can provide. The antenna is built on helical structure technology providing exceptional pattern control, polarization purity and high-efficiency in a compact form factor. It features an integrated SMA connector and rugged IP67 automotive grade components. This antenna is ideal for applications requiring minimal integration effort or for retrofitting existing products. The antenna is equipped with an O-ring.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/elt0014w\" style=\"color: #2445a2;\"\u003eSame antenna in WHITE color\u003c\/a\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003e\u003cbr\u003ePassive Antenna Performance:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003ctable style=\"width: 100%;\" cellspacing=\"0\" cellpadding=\"4\" border=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"85*\"\u003e \u003ccol width=\"85*\"\u003e \u003ccol width=\"85*\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e1166-1280 MHz (L2, L5, B2a, B2b, B3, G2, G3, E5a, E5B)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e1550-1610 MHz (L1, E1, B1I, B1C, G1)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003ePeak Efficiency \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e46%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e49%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003ePolarization\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eRHCP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eRHCP\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eRealized Gain \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e1,1dB\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e0,5dB\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eAxial Ratio \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eMax 1.2 dB at the Zenith\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eMax 0.9 dB at the Zenith\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eVSWR\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eMax 2:1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003eMax 2:1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeamwidth \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e135˚\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e125˚\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr valign=\"top\"\u003e\n\u003ctd style=\"text-align: left;\" width=\"33%\"\u003e\n\u003cp\u003e\u003cstrong\u003eHorizontal Coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e360˚\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"33%\"\u003e\n\u003cp\u003e360˚\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch6\u003e\u003cstrong\u003e\u003cbr\u003eSignal Received:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eGPS L1\/L2\/L5\u003c\/li\u003e\n\u003cli\u003eGLONASS G1\/G2\/G3\u003c\/li\u003e\n\u003cli\u003eGALILEO E1\/E5a\/E5b\u003c\/li\u003e\n\u003cli\u003eBDS B1I\/B2I\/B1C\/B2a\/B2b\/B3\u003c\/li\u003e\n\u003cli\u003eSBAS L1\/L5\u003c\/li\u003e\n\u003cli\u003eQZSS L1\/L2\/L5\u003c\/li\u003e\n\u003cli\u003eIRNSS I5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/ELT0014-2.png?v=1762282237\" alt=\"\" width=\"609\" height=\"456\"\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cstrong\u003ePhase Center Variation:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eIn azimuth plane: Max 10mm\u003c\/li\u003e\n\u003cli\u003eAs low as 40 degree elevation: Max 10mm\u003c\/li\u003e\n\u003cli\u003eBetween samples: Max 5mm\u003c\/li\u003e\n\u003cli\u003eOver frequency band: Max 10mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eRF Specifications:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e30 dBic @ 1227 MHz (typical)\u003c\/li\u003e\n\u003cli\u003e28 dBic @ 1575 MHz (typical)\u003c\/li\u003e\n\u003cli\u003e28 dBic @ 1602 MHz (typical)\u003c\/li\u003e\n\u003cli\u003eLNA Gain: 37 dB\u003c\/li\u003e\n\u003cli\u003eNoise Figure: 1.5 dB max\u003c\/li\u003e\n\u003cli\u003eAxial Ratio: \u0026gt;≤ 3 dB\u003c\/li\u003e\n\u003cli\u003eVoltage: 3.3 to 16 V\u003c\/li\u003e\n\u003cli\u003eCurrent: 29 mA max\u003c\/li\u003e\n\u003cli\u003eOut of Band Rejection: 40 dBc\u003c\/li\u003e\n\u003cli\u003eGroup Delay Variation: Less than 5ns over GNSS bands\u003c\/li\u003e\n\u003cli\u003eEMI Immunity Out of Band: 30 V\/m\u003c\/li\u003e\n\u003cli\u003eESD Circuit Protection: 15 kv human body model air discharge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eActive Quad Helix Antenna features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eQuadrifilar helix antenna\u003c\/li\u003e\n\u003cli\u003eConcurrent GNSS reception on GPS, GLONASS, Galileo and Beidou\u003c\/li\u003e\n\u003cli\u003eRugged IP67 rating with SMA mount\u003c\/li\u003e\n\u003cli\u003eSmall form factor\u003c\/li\u003e\n\u003cli\u003eGround plane independent\u003c\/li\u003e\n\u003cli\u003eGIS, RTK and other high accuracy GNSS applications\u003c\/li\u003e\n\u003cli\u003eLow power consumption\u003c\/li\u003e\n\u003cli\u003eLow phase center variation over azimuth and elevation and among different samples\u003c\/li\u003e\n\u003cli\u003eUltra-lightweight about: 18 gr.\u003c\/li\u003e\n\u003cli\u003eDimension: 59.7 x Ø27.5mm\u003c\/li\u003e\n\u003cli\u003eMounting: SMA mount\u003c\/li\u003e\n\u003cli\u003eAutomotive grade electronics\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GNSS Store","offers":[{"title":"Default Title","offer_id":55848070873420,"sku":"ELT0014","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/l1l2l5-high-performance-multiband-rtk-gnss-active-quad-helix-antenna-7960003.jpg?v=1782567977"},{"product_id":"elt0015","title":"Breakout Board LEA series for all LEA modules","description":"\u003ch5\u003e\u003cstrong\u003eBreakout boards for all LEA u-blox modules. Can help easy star with any LEA modules. We have a broad selection of versatile ublox breakout boards, for every usage. They are engineered to help you craft your projects and prototypes, ranging from robotics, sensing, wearable, displays, wireless technology and more.\u003c\/strong\u003e\u003c\/h5\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848071659852,"sku":"ELT0015","price":4.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/breakout-board-lea-series-for-all-lea-modules-5089154.jpg?v=1782567981"},{"product_id":"elt0017","title":"LEA-M8T GPS breakout board with Precision Timing","description":"\u003ch5\u003e\u003cstrong\u003eGPS LEA-M8T GPS breakout board with Precision Timing description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8T standalone concurrent GNSS modules are built on the exceptional performance of the M8 GNSS (GPS, GLONASS, BeiDou, QZSS, SBAS and Galileo-ready1) engine in the industry proven NEO and LEA form factors.\u003c\/p\u003e\n\u003cp\u003eThis M8 series of modules offers high sensitivity and rapid acquisition in applications requiring low system power. The LEA-M8T modules meet the requirements for GNSS timing applications (including fixed location, survey-in and RAIM). The modules deliver multi-GNSS, raw measurement data (code and carrier phase, Doppler) and multi-GNSS, QZSS L1S and IMES message data. Both modules offer easy design migration from previous generations adding BeiDou and concurrent multi-GNSS capability to existing products.\u003c\/p\u003e\n\u003cp\u003eSophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The LEA-M8T includes a SAW filter and antenna power supervision and is perfect for use with active antennas or antenna signal distribution systems. Both modules include Flash memory for field upgrade if required. UART, SPI and I2C interfaces provide connectivity and enable synergies with most u-blox cellular modules.\u003c\/p\u003e\n\u003cp\u003eThis M8 modules use GNSS chips qualified according to AEC-Q100, are manufactured in ISO\/TS 16949 certified sites, and fully tested on a system level. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.\u003c\/p\u003e\n\u003cp\u003eu-blox’ AssistNow Assistance services supply aiding information, such as ephemeris, almanac and time, reducing the time to first fix significantly and improving acquisition sensitivity. The u-blox M8 generation extends validities of AssistNow Offline data (up to 35 days) and AssistNow Autonomous data (up to 6 days), providing the benefits of faster acquisition for longer durations since last use.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eConcurrent reception of GPS\/QZSS, GLONASS, BeiDou\u003c\/li\u003e\n\u003cli\u003eMarket leading acquisition and tracking sensitivity\u003c\/li\u003e\n\u003cli\u003eOptimized accuracy and availability with Survey-in and single-satellite timing\u003c\/li\u003e\n\u003cli\u003eMinimized power consumption with low duty-cycle operation\u003c\/li\u003e\n\u003cli\u003eMaximized reliability with Integrity monitoring and alarms\u003c\/li\u003e\n\u003cli\u003eMulti-GNSS Raw data, IMES Message data\u003c\/li\u003e\n\u003cli\u003eBackward compatible with LEA-5T, LEA-6T and NEO-6T\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003eUART, I2C and USB interfaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eDimensions: 38x32 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4 gr.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848074051916,"sku":"ELT0017","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8t-gps-breakout-board-with-precision-timing-7477497.jpg?v=1782567980"},{"product_id":"elt0018","title":"LEA-M8S GPS breakout board designs to multi‑GNSS","description":"\u003ch5\u003e\u003cstrong\u003eGPS LEA-M8S GPS breakout board designed for multi GNSS description\u003c\/strong\u003e\u003c\/h5\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848076673356,"sku":"ELT0018","price":29.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8s-gps-breakout-board-designs-to-multignss-2889152.jpg?v=1782567980"},{"product_id":"elt0019","title":"LEA-M8F time \u0026 frequency reference breakout board","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8F GPS, Glonass, Beidou breakout board with time \u0026amp; frequency reference description\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis time and frequency products provide multi-GNSS synchronization for cost-sensitive network edge equipment including Small Cell and Femto wireless base-stations. The LEA-M8F module is a fully self-contained phase and frequency reference based on GNSS, but can also be used as part of a complete timing sub-system including macro-sniff Synchronous Ethernet and packet timing.\u003c\/p\u003e\n\u003cp\u003eThe LEA-M8F module includes a low-noise 30.72 MHz VCTCXO meeting the master reference requirements for LTE Small Cells and provides 100 ppb autonomous hold-over. The LEA-M8F module can also measure and control an external TCXO or OCXO for TD-LTE, LTE Advanced and other applications requiring extended hold-over. External sources of synchronization are supported through time-pulse and frequency inputs and a message interface.\u003c\/p\u003e\n\u003cp\u003eThis allows measurements from macro-sniff, Sync-E or packet timing to be combined with measurements from GNSS. u-blox time and frequency products include timing integrity alarms that report phase and frequency uncertainty both during normal operation and hold-over. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848077656396,"sku":"ELT0019","price":89.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8f-time-frequency-reference-breakout-board-9251020.jpg?v=1782567979"},{"product_id":"elt0020","title":"MAX-M8Q GPS\/QZSS GLONASS BeiDou 18Hz receiver with Antenna","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS\/QZSS GLONASS BeiDou 18Hz receiver Reference Board with Active GPS antenna for your mini UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements. The MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 concurrent GNSS receiver GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1, SBAS L1 C\/A: WAAS, EGNOS, MSAS\u003c\/li\u003e\n\u003cli\u003eSensitivity: Tracking -167dBm Nav –164 dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART(Tx,Rx) interface\u003c\/li\u003e\n\u003cli\u003eActive high gain GPS antenna\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 34x14 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848078573900,"sku":"ELT0020","price":55.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/max-m8q-gpsqzss-glonass-beidou-18hz-receiver-with-antenna-9710306.jpg?v=1782567981"},{"product_id":"elt0021","title":"MAX-M8Q GPS GLONASS BeiDou 18Hz NANO receiver with UF.L connector","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS\/QZSS GLONASS BeiDou 18Hz NANO receiver Reference Board with UF.L (IPEX) antenna connector for your mini UAV systems, Robots, RC, FPV or other projects. Ultra small and light. Nail size.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8 series of standalone concurrent GNSS modules is built on the exceptional performance of the u-blox M8 engine in the industry proven MAX form factor. With dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest amount of visible satellites from two GNSS (GPS, GLONASS and BeiDou) systems for more reliable positioning.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8 series is ideal for performance driven applications. The MAX-M8 series provides high sensitivity and minimal acquisition times while maintaining low system power. The MAX-M8Q provides best performance for passive and active antennas designs. Sophisticated RF-architecture and interference suppression ensure maximum performance even in GNSS-hostile environments. The MAX-M8 combines a high level of integration capability with flexible connectivity options in a miniature package. This makes MAX-M8 perfectly suited for industrial applications with strict size and cost requirements.\u003c\/p\u003e\n\u003cp\u003eThe MAX-M8Q is also halogen free (green) which makes it also a perfect solution for consumer applications. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 concurrent GNSS receiver GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1, SBAS L1 C\/A: WAAS, EGNOS, MSAS\u003c\/li\u003e\n\u003cli\u003eSensitivity: Tracking -167dBm Nav –164 dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART (Tx, Rx) and I2C interface on 1,27mm pitch pins\u003c\/li\u003e\n\u003cli\u003eUF.L (I-PEX) antenna connector\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 20x10 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 1.5 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848081031500,"sku":"ELT0021","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/max-m8q-gps-glonass-beidou-18hz-nano-receiver-with-ufl-connector-7003360.jpg?v=1782567981"},{"product_id":"elt0024","title":"MAX-M8Q Mic GPS GNSS LIS3MDL SAW LNA Triple Band ANT","description":"\u003ch5\u003e\u003cstrong\u003eMAX-M8Q u-blox GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna + Triple Band Pass filter and LNA\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe MAX-M8Q Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The MAX-M8Q Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the MAX-M8Q breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the MAX-M8Q with LIS3MDL Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (MAX-M8Q)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUART (Tx, Rx) and I2C (SDA, SCL)(for LIS3MDL) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eTriple band Band Pass filter\u003c\/li\u003e\n\u003cli\u003eTriple Band LNA\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/u-center-2\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 I2C port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start and settings storage\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 25x25 mm; hole distance 22x22mm\u003c\/li\u003e\n\u003cli\u003eWeight: 16 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eBest performance for this weight and size!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848082997580,"sku":"ELT0024","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/max-m8q-mic-gps-gnss-lis3mdl-saw-lna-triple-band-ant-9817000.jpg?v=1782567980"},{"product_id":"elt0026","title":"LEA-M8S GPS\/QZSS GLONASS BeiDou module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8S Reference Board with sma connectors for active GPS antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8S breakout Evaluation board makes evaluating the high performance of the u-blox 8 GPS\/QZSS, GLONASS, BeiDou positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The LEA-M8S breakout is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the LEA-M8S breakout can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the LEA-M8S integrated sma connectors for High Gain GPS antenna.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe LEA-M8S module delivers concurrent GNSS location capability together with high-performance u-blox M8 positioning technology in the industry proven LEA form factor. With its dual-frequency RF front-end, the u-blox M8 concurrent GNSS engine is able to intelligently use the highest number of visible satellites from two of the GNSS systems (GPS, GLONASS and BeiDou) for more reliable positioning. The LEA-M8S provides exceptional performance with low system power, and is optimized for cost sensitive applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply \u0026amp; Data Link via USB\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Device\/USB V2.0 compatible\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center u-blox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eBattery holder for 3 V type 621 Lithium battery (HOT module start)\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 USB port, 1 TTL UART port, 1 RS-232 port\u003c\/li\u003e\n\u003cli\u003eTime pulse output LED and pin for time synhronization\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848088928588,"sku":"ELT0026","price":62.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8s-gpsqzss-glonass-beidou-module-3047585.jpg?v=1782567976"},{"product_id":"elt0029","title":"LEA-M8T GPS\/QZSS GLONASS BeiDou Timing and RAW data module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8T GPS\/QZSS, GLONASS, BeiDou Timing and RAW data EVAL module with USB, UART, RS-232 interface and with SMA connector for active GPS antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8T Evaluation board makes evaluating the high performance of the u-blox 8 GPS\/QZSS, GLONASS, BeiDou positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The LEA-M8T Evaluation board is compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the LEA-M8T Evaluation board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the LEA-M8T with integrated sma connectors for High Gain GPS antenna.\u003cspan style=\"font-size: 14px;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848091124044,"sku":"ELT0029","price":98.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8t-gpsqzss-glonass-beidou-timing-and-raw-data-module-9317707.jpg?v=1782567975"},{"product_id":"elt0030","title":"LEA-M8F time \u0026 frequency reference GNSS EVAL module","description":"\u003ch5\u003e\u003cstrong\u003eLEA-M8F GPS, Glonass, Beidou receiver with time \u0026amp; frequency reference. Ready to use EVAL module\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe LEA-M8F module is a fully self-contained phase and frequency reference based on GNSS, but can also be used as part of a complete timing sub-system including macro-sniff Synchronous Ethernet and packet timing. The LEA-M8F module includes a low-noise 30.72 MHz VCTCXO meeting the master reference requirements for LTE Small Cells and provides 100 ppb autonomous hold-over. The LEA-M8F module can also measure and control an external TCXO or OCXO for TD-LTE, LTE Advanced and other applications requiring extended hold-over. External sources of synchronization are supported through time-pulse and frequency inputs and a message interface. This allows measurements from macro-sniff, Sync-E or packet timing to be combined with measurements from GNSS. They feature a high dynamic range radio with both analog and digital interference mitigation supporting their inclusion as an integral part of a local area base station design.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003ePower Supply \u0026amp; Data Link via USB\u003c\/li\u003e\n\u003cli\u003eUSB 1.1 Device\/USB V2.0 compatible\u003c\/li\u003e\n\u003cli\u003eSMA antenna connectors\u003c\/li\u003e\n\u003cli\u003eActive and Passive Antenna support\u003c\/li\u003e\n\u003cli\u003eu-center Evaluation Software\u003c\/li\u003e\n\u003cli\u003eEasy to use\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 USB port, 1 TTL UART port, 1 SPI port\u003c\/li\u003e\n\u003cli\u003eTime pulse output LED and pin for time synhronization\u003c\/li\u003e\n\u003cli\u003eSDA SCL Pin for external DAC\u0026gt;\u003c\/li\u003e\n\u003cli\u003e38.72MHz oscillator out\u003c\/li\u003e\n\u003cli\u003eTwo Freq Phase in for external oscillator control\u003c\/li\u003e\n\u003cli\u003ePCB Size 33x31 mm\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848091484492,"sku":"ELT0030","price":129.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/lea-m8f-time-frequency-reference-gnss-eval-module-4088562.jpg?v=1782567975"},{"product_id":"elt0031","title":"NEO-M8N GPS GNSS receiver board with SMA and mini USB for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEW version with USB type C connectors available\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/ELT0331\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0331\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNEO-M8N Reference Board with SMA antenna connector and mini USB for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox u-blox M8 GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB\u003c\/strong\u003e, \u003cstrong\u003eI2C\u003c\/strong\u003e (SDA,SCL) and \u003cstrong\u003eUART\u003c\/strong\u003e (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003emini USB connector\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e \u003c\/a\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 I2C port,1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848092041548,"sku":"ELT0031","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-gps-gnss-receiver-board-with-sma-and-mini-usb-for-uav-robots-9285574.jpg?v=1782567975"},{"product_id":"elt0032","title":"NEO-M8T TIME and RAW receiver board with SMA (RTK ready)","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T Reference Board with SMA antenna connectors for your RTK systems, UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #218e53;\"\u003e\u003cstrong\u003eNEW Version with USB type C available\u003c\/strong\u003e\u003c\/span\u003e \u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"\/products\/ELT0332\" class=\"btn btn-default\" style=\"color: #2445a2;\"\u003e\u003cstrong\u003eELT0332\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eThis timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C and Uart (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eActive GNSS antenna support\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port, 1 I2C port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for 3 V type 621 Lithium battery (HOT module start)\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18mm\u003c\/li\u003e\n\u003cli\u003eWeight 8.1 gram\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848093450572,"sku":"ELT0032","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-time-and-raw-receiver-board-with-sma-rtk-ready-4443125.jpg?v=1782567976"},{"product_id":"elt0035","title":"NEO-M8N GPS GNSS receiver board with SMA for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eSMA antenna connector\u003c\/li\u003e\n\u003cli\u003e6 pin and 4 pin JST SH connectors\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 40x18 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 8.1 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848097644876,"sku":"ELT0035","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-gps-gnss-receiver-board-with-sma-for-uav-robots-8688531.jpg?v=1782567976"},{"product_id":"elt0039","title":"NEO-M8N GPS GNSS Beidou Triple Band Antenna EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection. Ready for unwanted signal interference or multipath blocking. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848103379276,"sku":"ELT0039","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-gps-gnss-beidou-triple-band-antenna-emi-protection-9642637.jpg?v=1782567976"},{"product_id":"elt0040","title":"NEO-M8T Time \u0026 RAW GPS GNSS BeiDou Triple Band EMI protection","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T Timing \u0026amp; RAW GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8N concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eu-blox timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003e1 TTL UART port, 1 USB port\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848105312588,"sku":"ELT0040","price":79.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-time-raw-gps-gnss-beidou-triple-band-emi-protection-3055047.jpg?v=1782567974"},{"product_id":"elt0041","title":"NEO-M8L ADR RAW receiver with 3D sensors and Triple Band Antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L Reference Board with triple band antenna, including 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. with EMI protection. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 80 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 46 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848108818764,"sku":"ELT0041","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-adr-raw-receiver-with-3d-sensors-and-triple-band-antenna-6259254.jpg?v=1782567974"},{"product_id":"elt0045","title":"NEO-M8N Triple Band receiver EMI and RFI protection LIS3MDL PRO version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI and RFI protection + LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. PRO Version.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have Double LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eDouble LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-blox u-center\u003c\/a\u003e\u003c\/span\u003e center GPS Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848113799500,"sku":"ELT0045","price":99.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-triple-band-receiver-emi-and-rfi-protection-lis3mdl-pro-version-6555195.jpg?v=1782567976"},{"product_id":"elt0046","title":"NEO-M8T Time \u0026 RAW Triple Band EMI and RFI protection + LIS3MDL PRO version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T Timing \u0026amp; RAW GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI and RFI protection + LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. (RTK Ready)\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have Double LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the RTK systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eThis timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. ublox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eDouble LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848115044684,"sku":"ELT0046","price":109.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-time-raw-triple-band-emi-and-rfi-protection-lis3mdl-pro-version-2116058.jpg?v=1782567976"},{"product_id":"elt0048","title":"NEO-M8L ADR receiver with 3D sensors and EMI protection + LIS3MDL PRO","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L PRO version receiver with double SAW and LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer, including inertial 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. Ready for unwanted signal interference or multipath blocking. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the UDR systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available, I2C for LIS3MDL\u003c\/li\u003e\n\u003cli\u003eTripple Band Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848119664972,"sku":"ELT0048","price":109.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-adr-receiver-with-3d-sensors-and-emi-protection-lis3mdl-pro-2591710.jpg?v=1782567976"},{"product_id":"elt0050","title":"NEO-M8T InCase series TIME \u0026 RAW receiver board (RTK ready)","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8T Reference Board with UF.L antenna connectors for your RTK systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eThis timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848122909004,"sku":"ELT0050","price":66.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-incase-series-time-raw-receiver-board-rtk-ready-5262261.jpg?v=1782567974"},{"product_id":"elt0051","title":"NEO-M8L InCase series ADR RAW receiver with 3D sensors","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8L Reference Board with UF.L antenna connectors, including 3D sensors, for your ADR systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1I, Galileo E1B\/C SBAS L1 C\/A: WAAS, EGNOS, MSAS, GAGAN\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) WheelTick, RAW data out\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services, OMA SUPL \u0026amp; 3GPP compliant\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eWheelTick Out\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, WheelTick, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848124547404,"sku":"ELT0051","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-incase-series-adr-raw-receiver-with-3d-sensors-1271349.jpg?v=1782567976"},{"product_id":"elt0053","title":"NEO-M8N InCase series GPS GNSS receiver board for UAV, Robots","description":"\u003ch5\u003e\u003cstrong\u003eInCase series NEO-M8N Reference Board with UF.L antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x18mm\u003c\/li\u003e\n\u003cli\u003eWeight: 3.3 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eCan be easy mounted in your case by double sided tape\u003c\/li\u003e\n\u003cli\u003e12 pin JST SH connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848126611788,"sku":"ELT0053","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-incase-series-gps-gnss-receiver-board-for-uav-robots-8445188.jpg?v=1782567974"},{"product_id":"elt0055","title":"NEO-M8T Time \u0026 RAW Dual Band + LIS3MDL Tallysman for RTK","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T Timing \u0026amp; RAW GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna EMI and RFI protection + LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots can be used also as a Rover or Base station for RTK system. Board have EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eThis timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. ublox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T\u0026lt;\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and Uart (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848128086348,"sku":"ELT0055","price":184.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-time-raw-dual-band-lis3mdl-tallysman-for-rtk-1087708.jpg?v=1782567974"},{"product_id":"elt0056","title":"NEO-M8L ADR RAW receiver with 3D sensors, EMI protection + LIS3MDL and Tallysman ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR RAW receiver with 3D sensors GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna, EMI protection and LIS3MDL Magnetometer. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848130314572,"sku":"ELT0056","price":194.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-adr-raw-receiver-with-3d-sensors-emi-protection-lis3mdl-and-tallysman-ant-5345556.jpg?v=1782567935"},{"product_id":"elt0058","title":"NEO-M8N Dual Band receiver with EMI and RFI protection + LIS3MDL and Tallysman antenna","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N Dual Band receiver GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with Tallysman active antenna EMI protection and LIS3MDL Magnetometer.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eDual band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center u-blox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 60x60 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 113 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTallysman antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848134246732,"sku":"ELT0058","price":149.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-dual-band-receiver-with-emi-and-rfi-protection-lis3mdl-and-tallysman-antenna-5601814.jpg?v=1782567933"},{"product_id":"elt0060","title":"NEO-M8P RTK receiver Base or Rover EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8P-2 Precise Point Positioning receiver X series version with SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for RTK. Very strong signal for good price. Base or Rover operation.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eBoard can be used for a Base or Rover operation mode! This board designed for large scale drone or groud robots. Board have high gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. The NEO-M8P modules combine the high performance u-blox M8 positioning engine with u-blox’s Real Time Kinematic (RTK) technology.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P provides cm-level GNSS performance designed to meet the needs of unmanned vehicles and other machine control applications requiring accurate guidance. u-blox’s RTK technology introduces the concept of a “rover” (NEO-M8P-0) and a “base” (NEO-M8P-2) on the M8 platform for stunning cm-level accuracy in clear sky environments. The base module sends corrections via the RTCM protocol to the rover module via a communication link enabling the rover to output its position relative to the base at cm level accuracies.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8P is ideal for applications requiring vehicles to move faster and more accurately, operate more efficiently, and automatically return to base platforms. Such applications include UAV, unmanned vehicles (e.g. robotic lawn mowers), and Precision Agriculture guidance. The NEO-M8P modules enable the system integrator to access u-blox’s complete end-to-end RTK solution including the stationary “survey-in” functionality that is designed to reduce the setup time and increase the flexibility of the application. NEO-M8P modules are compatible with a wide range of communication technologies (Cellular, WiFi, BlueTooth, UHF) enabling the user to select the communication link best suited to their application. With u‑blox’s RTK technology, integration and software development efforts can be reduced, ensuring a minimal cost of ownership.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch6\u003e\u003cstrong\u003eHighlights:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eCentimeter-level GNSS positioning for the mass market\u003c\/li\u003e\n\u003cli\u003eIntegrated Real Time Kinematics (RTK) for fast time-to-market\u003c\/li\u003e\n\u003cli\u003eSmall, light, and energy-efficient RTK module\u003c\/li\u003e\n\u003cli\u003eComplete and versatile solution due to base and rover variants\u003c\/li\u003e\n\u003cli\u003eWorld-leading GNSS positioning technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003e\u003cstrong\u003eTechnical Features:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA,SCL) for magnetometer, UART (Tx, Rx) interface\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca rel=\"noreferrer noopener\" style=\"color: #2445a2;\" href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eTime pulse LED, GEO LED, RTK LED\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848138703180,"sku":"ELT0060","price":229.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8p-rtk-receiver-base-or-rover-emi-and-rfi-protection-lis3mdl-x-series-8208032.jpg?v=1782567938"},{"product_id":"elt0061","title":"NEO-M8N Triple Band receiver with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS PRO version receiver with double SAW and high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. X series version very strong signal for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have High Gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots.\u003c\/p\u003e\n\u003cp\u003eThis boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, UART (Tx, Rx), I2C for LIS3MDL\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100mm; hole distance 90x90mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848139915596,"sku":"ELT0061","price":105.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-triple-band-receiver-with-emi-and-rfi-protection-lis3mdl-x-series-4303431.jpg?v=1782567935"},{"product_id":"elt0062","title":"NEO-M8T Time \u0026 RAW Triple Band with EMI and RFI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eX series version NEO-M8T Timing \u0026amp; RAW GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS X Series version receiver with high gain LNA systems for high signal noise ratio build-in EMI and RFI protection + LIS3MDL Magnetometer. Very strong signal level for good price.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have high gain LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the RTK systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eu-blox timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel ublox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA systems with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm; hole distance 90x90 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to us\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848141357388,"sku":"ELT0062","price":119.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-time-raw-triple-band-with-emi-and-rfi-protection-lis3mdl-x-series-7156709.jpg?v=1782567935"},{"product_id":"elt0064","title":"NEO-M8L ADR RAW receiver. EMI protection + LIS3MDL X series","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS X Series version receiver with high gain LNA systems for high signal noise ratio build-in EMI protection and LIS3MDL Magnetometer. Very strong signal level for good price. The NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eIncorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous navigation in urban environment, even at signal loss, with speed or wheel-tick information from the vehicle\u003c\/li\u003e\n\u003cli\u003eOn-board Ultra low noise 3.3 V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL) and UART (Tx, Rx) RAW data out\u003c\/li\u003e\n\u003cli\u003eMini USB connector\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eHigh Gain LNA with very low noise figure\u003c\/li\u003e\n\u003cli\u003eDouble Band Pass filter for noise rejection\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eEMI and RFI protection\u003c\/li\u003e\n\u003cli\u003eBackup supercapacitor\u003c\/li\u003e\n\u003cli\u003eDimensions: 100x100 mm; hole distance 90x90 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 79 gr.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848144961868,"sku":"ELT0064","price":119.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-adr-raw-receiver-emi-protection-lis3mdl-x-series-7837523.jpg?v=1782567935"},{"product_id":"elt0065","title":"NEO-M8T InCase PIN series TIME \u0026 RAW receiver board (RTK ready)","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8T Reference Board with SMA antenna connectors for your RTK systems, UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eThis timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB, I2C, SPI \u003c\/strong\u003eand\u003cstrong\u003e UART\u003c\/strong\u003e (Tx, Rx)\u003cstrong\u003e RAW \u003c\/strong\u003edata out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput available for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848147026252,"sku":"ELT0065","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-incase-pin-series-time-raw-receiver-board-rtk-ready-8832604.jpg?v=1782567934"},{"product_id":"elt0066","title":"NEO-M8L InCase PIN series ADR RAW receiver board","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8L Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles. Incorporating u-blox’s latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox’s latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848147648844,"sku":"ELT0066","price":69.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-incase-pin-series-adr-raw-receiver-board-1063132.jpg?v=1782567933"},{"product_id":"elt0068","title":"NEO-M8N InCase PIN series GNSS receiver board","description":"\u003ch5\u003e\u003cstrong\u003eInCase PIN series NEO-M8N Reference Board with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Designed for easy integration in your system. \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the NEO-M8N with SMA antenna connectors.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C, SPI and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eSupport active antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 1\u003c\/li\u003e\n\u003cli\u003eTime pulse LED 2\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eBattery holder for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: 36x19 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.8 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e12 pin 6x2 row 2.54mm connector\u003c\/li\u003e\n\u003cli\u003eOutput avail for use Time Pulse 1, Time Pulse 2, Interupt 0, Interuprt 1, all pins for SPI, UART, USB, I2C interface\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151122252,"sku":"ELT0068","price":68.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-incase-pin-series-gnss-receiver-board-1693365.jpg?v=1782567934"},{"product_id":"elt0069","title":"NEO-M8N Triple Band receiver with EMI protection LIS3MDL XXL version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection + LIS3MDL Magnetometr. Ready for unwanted signal interference or multipath blocking. XXL Version\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. The NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, Glonass, Beidou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometer\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848151712076,"sku":"ELT0069","price":84.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-triple-band-receiver-with-emi-protection-lis3mdl-xxl-version-1143165.jpg?v=1782567933"},{"product_id":"elt0070","title":"Enhanced Precision with NEO-M8T Time \u0026 RAW Triple Band EMI Protection LIS3MDL XXL Version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T Timing \u0026amp; RAW GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection with LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking. (RTK Ready) \u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T concurrent GNSS modules deliver high integrity, precision timing in demanding applications world-wide. Support for BeiDou and GLONASS constellations enables compliance with national requirements. Enhanced sensitivity and concurrent dual-constellation reception extend coverage and integrity to challenging signal environments. Survey-in and fixed-position navigation reduce timing jitter, even at low signal levels, and enable synchronization to be maintained with as few as one single satellite in view. Support for low duty cycle operation reduces power consumption for battery-powered applications.\u003c\/p\u003e\n\u003cp\u003eu-blox timing products include timing integrity measures with Receiver Autonomous Integrity Monitoring (RAIM) and continuous phase uncertainty estimation. They feature high dynamic range radios with both analog and digital interference mitigation, supporting applications in wireless communications equipment. u-blox timing products can make use of u-blox AssistNow or industry standard aiding data. This reduces the time to first fix and delivers exceptional acquisition sensitivity, even on first installation before precise location, time or frequency are known.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8T\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART (Tx, Rx) RAW data out available\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save settings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848152858956,"sku":"ELT0070","price":80.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/enhanced-precision-with-neo-m8t-time-raw-triple-band-emi-protection-lis3mdl-xxl-version-1032463.jpg?v=1782567932"},{"product_id":"elt0072","title":"NEO-M8L ADR Triple Band EMI protection LIS3MDL XXL version","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver with EMI protection with LIS3MDL Magnetometer. Ready for unwanted signal interference or multipath blocking.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThis board designed for large scale drone or groud robots. Board have LNA with very low noise figure and SAW band pass filter, also include EMI and RFI protection and will be used with large current robots. This boards ready for unwanted signal interference or multipath blocking. This board have very good SNR ratio and will work in the UDR systems.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L 3D Automotive Dead Reckoning (ADR) modules combine GNSS, inertial sensing, and speed information from the vehicle to provide continuous and accurate 3D positioning for road vehicles.\u003c\/p\u003e\n\u003cp\u003eIncorporating u-blox latest advancements in multi-GNSS signal processing (now including Galileo), the latest version of NEO-M8L delivers the ideal solution where navigation perfor­mance is the priority, regardless of GNSS signal quality or avail­ability. In addition to the on-board sensors, NEO-M8L further eases installation with automatic configuration of speed or wheel-tick inputs, and compensation for in-vehicle antennas.\u003c\/p\u003e\n\u003cp\u003eThe intelligent combination of GNSS and sensor measurements enables accurate, real-time positioning, speed and heading information at rates up to 20 Hz, as essential for smooth and re­sponsive interactive display. Access to native, high rate sensor data enables host applications to make full use of the receiver’s assets.\u003c\/p\u003e\n\u003cp\u003eThe NEO-M8L includes u-blox latest generation GNSS tech­nology which adds Galileo to the multi-constellation reception that already includes GPS, GLONASS, BeiDou and QZSS. The module provides high sensitivity and fast GNSS signal acquisi­tion and tracking. UART, USB, DDC (I2C compliant) and SPI interface options provide flexible connectivity and enable simple integration with most u-blox cellular modules.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB and UART(Tx, Rx) RAW data out avaiable\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS, BeiDou antenna\u003c\/li\u003e\n\u003cli\u003eLIS3MDL I2C magnetometr\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eDimensions: Round 100 mm; hole distance 45x45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 51 gr.\u003c\/li\u003e\n\u003cli\u003eEMI RFI protection\u003c\/li\u003e\n\u003cli\u003eReady for unwanted signal interference or multipath blocking\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154562892,"sku":"ELT0072","price":80.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-adr-triple-band-emi-protection-lis3mdl-xxl-version-7871398.jpg?v=1782567931"},{"product_id":"elt0073","title":"NEO-M8N Mini GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8N GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8N Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8N Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8N breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8N with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8N)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e\u003c\/span\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154693964,"sku":"ELT0073","price":75.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8n-mini-gps-gnss-lis3mdl-triple-band-25mm-ant-8426002.jpg?v=1782567933"},{"product_id":"elt0074","title":"NEO-M8T Mini TIME \u0026 RAW GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8T GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8T Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8T Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8T breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8T with Compass.\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8T)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"color: #2445a2;\"\u003e\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" style=\"color: #2445a2;\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eu-center ublox\u003c\/a\u003e \u003c\/span\u003eEvaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight 14: gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848154857804,"sku":"ELT0074","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8t-mini-time-raw-gps-gnss-lis3mdl-triple-band-25mm-ant-1781501.jpg?v=1782567930"},{"product_id":"elt0076","title":"NEO-M8L Mini ADR GPS GNSS + LIS3MDL Triple Band 25mm ANT","description":"\u003ch5\u003e\u003cstrong\u003eNEO-M8L ADR receiver with 3D sensors GPS, GLONASS, Galileo, BeiDou, QZSS and SBAS receiver + LIS3MDL Compass with Triple Band antenna.\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eThe NEO-M8L Evaluation board makes evaluating the high performance of the u-blox 8 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated. The NEO-M8L Breakout board is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. Furthermore, the NEO-M8L breakout board can be used with a PDA or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested PCB for the u-blox NEO-M8L with Compass\u003c\/p\u003e\n\u003chr\u003e\n\u003cul\u003e\n\u003cli\u003e72-channel u-blox M8 engine GPS\/QZSS L1 C\/A, GLONASS L10F, BeiDou B1 SBAS L1 C\/A: WAAS, EGNOS, MSAS Galileo-ready E1B\/C (NEO-M8L)\u003c\/li\u003e\n\u003cli\u003eSuperSense Indoor GPS, -167dBm\u003c\/li\u003e\n\u003cli\u003eOn-board low noise 3.3V voltage regulator and RF filter for noise blocking\u003c\/li\u003e\n\u003cli\u003eUSB, I2C (SDA, SCL)(for LIS3MDL) and UART (Tx, Rx)\u003c\/li\u003e\n\u003cli\u003eTriple band GPS, GLONASS and BeiDou antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.u-blox.com\/en\/product\/u-center\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan style=\"color: #2445a2;\"\u003eu-center ublox\u003c\/span\u003e\u003c\/a\u003e Evaluation Software\u003c\/li\u003e\n\u003cli\u003eExtensive visualization and evaluation features\u003c\/li\u003e\n\u003cli\u003eSupports AssistNow Online and AssistNow Offline A-GPS services\u003c\/li\u003e\n\u003cli\u003eTime pulse LED\u003c\/li\u003e\n\u003cli\u003eFlash memory for firmware upgrade and settings inside in the module (can save setings without battery)\u003c\/li\u003e\n\u003cli\u003eSupercapacitor for HOT module start\u003c\/li\u003e\n\u003cli\u003eBuild-in LIS3MDL Compass\u003c\/li\u003e\n\u003cli\u003eDimensions: 35x35 mm; hole distance 30x30 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 14 gr.\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ELTEHS","offers":[{"title":"Default Title","offer_id":55848156234060,"sku":"ELT0076","price":74.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0991\/6262\/0236\/files\/neo-m8l-mini-adr-gps-gnss-lis3mdl-triple-band-25mm-ant-8574280.jpg?v=1782567932"}],"url":"https:\/\/gnss.store\/collections\/all.oembed?page=10","provider":"GNSS Store","version":"1.0","type":"link"}